46
Specifications
System
Laser:
Semiconductor laser
Outputs
(
Jack name:
Jack type/Output level/Load
impedance)
LINE OUT (AUDIO):
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19 pin-Standard Connector
COMPONENT VIDEO OUT (Y, P
B
/C
B
,
P
R
/C
R
) (Taiwan model):
Phono jack/Y: 1.0 Vp-p/P
B
/C
B
, P
R
/C
R
:
interlace*
1
= 0.648 Vp-p,
progressive or interlace*
2
= 0.7 Vp-p/75
ohms
*
1
BLACK LEVEL (COMPONENT OUT) is ON
*
2
BLACK LEVEL (COMPONENT OUT) is OFF
COMPONENT VIDEO OUT (Y, P
B
/
C
B
,
P
R
/
C
R
) (Model for other area):
Phono jack/Y: 1.0 Vp-p, P
B
/C
B
, P
R
/
C
R
:
0.7 Vp-p/75 ohms
LINE OUT (VIDEO):
Phono jack/1.0 Vp-p/75 ohms
USB (DVP-NS728H and DVP-NS728HP
only):
USB jack Type A, maximum current
500 mA (For connecting USB device)
General
Power requirements:
Taiwan model: 110 V AC, 60Hz
Model for other areas: 110 – 240 V AC,
50/60 Hz
See page 2 for further information.
Power consumption:
DVP-NS718H, DVP-NS710HP, and
DVP-NS718HP: 10 W
DVP-NS728H and DVP-NS728HP: 12 W
Dimensions (approx.):
430
×
43
×
206 mm (width/height/depth)
incl. projecting parts
Mass (approx.):
DVP-NS718H, DVP-NS710HP, and
DVP-NS718HP: 1.5 kg
DVP-NS728H and DVP-NS728HP: 1.6 kg
Operating temperature:
5
°
C to 35
°
C
Operating humidity:
25 % to 80 %
Supplied accessories
• Audio/Video cable (phono plug
×
3
y
phono plug
×
3) (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
• HDMI cord (1) (supplied with DVP-
NS710HP, DVP-NS718HP, and DVP-
NS728HP only)
Specifications and design are subject to
change without notice.
E
NERGY
S
TAR
R
is a U.S. registered mark.
As an
E
NERGY
S
TAR
R
Partner, Sony
Corporation has determined that this product
meets the
E
NERGY
S
TAR
R
guidelines for
energy efficiency.
