Sony DVP-NS715P Service Manual Download

Page: 20 / 94

1-14

◆

When you have already registered a

password

The display for entering the password
appears.

Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.

The display for setting the playback
limitation level appears.

Press

to select “STANDARD,”

then press ENTER.

The selection items for “STANDARD”
are displayed.

Press

to select a geographic area

as the playback limitation level, then
press ENTER.

The area is selected.
When you select “OTHERS

,” select

and enter a standard code in the table on
page 59 using the number buttons.

Press

to select “LEVEL,” then

press ENTER.

The selection items for “LEVEL” are
displayed.

Select the level you want using

then press ENTER.

Parental Control setting is complete.

The lower the value, the stricter the
limitation.

To turn off the Parental Control function

Set “LEVEL” to “OFF” in Step 8.

To play a disc for which Parental Control is
set

Insert the disc and press

The display for entering your password
appears.

Enter your 4-digit password using the
number buttons, then press ENTER.
The player starts playback.

Hint

If you forget your password, remove the disc and
repeat Steps 1 to 3 of “Parental Control (limited
playback).” When you are asked to enter your
password, enter “199703” using the number
buttons, then press ENTER. The display will ask
you to enter a new 4-digit password. After you enter
a new 4-digit password, replace the disc in the
player and press

. When the display for entering

your password appears, enter your new password.

Notes

• When you play discs which do not have the

Parental Control function, playback cannot be
limited on this player.

• Depending on the disc, you may be asked to

change the parental control level while playing

PARENTAL CONTROL

Enter password, then press

ENTER

PARENTAL CONTROL

LEVEL:

OFF
USA

STANDARD:

PARENTAL CONTROL

LEVEL:

OFF
USA

STANDARD:

USA

OTHERS

PARENTAL CONTROL

LEVEL:

OFF

STANDARD:

8:
7:
6:
5:

NC17

PARENTAL CONTROL

LEVEL:
STANDARD:

USA

PG13

Us
in

g Vari

ous

ddi
tiona
l Fun

the disc. In this case, enter your password, then
change the level. If the Resume Play mode is
canceled, the level returns to the original level.

Area Code

Changing the password

Press DISPLAY while the player is in
stop mode.

The Control Menu appears.

Press

to select

(PARENTAL CONTROL), then press
ENTER.

The options for “PARENTAL
CONTROL” appear.

Press

to select “PASSWORD

,” then press ENTER.

The display for entering the password
appears.

Enter your 4-digit password using the
number buttons, then press ENTER.

Enter a new 4-digit password using the
number buttons, then press ENTER.

To confirm your password, re-enter it
using the number buttons, then press
ENTER.

If you make a mistake entering your
password

Press

before you press ENTER and input

the correct number.

If you make a mistake

Press

RETURN.

To turn off the display

Press DISPLAY repeatedly until the display
is turned off.

Standard

Code number

Argentina

2044

Australia

2047

Austria

2046

Belgium

2057

Brazil

2070

Canada

2079

Chile

2090

China

2092

Denmark

2115

Finland

2165

France

2174

Germany

2109

India

2248

Indonesia

2238

Italy

2254

Japan

2276

Korea

2304

Malaysia

2363

Mexico

2362

Netherlands

2376

New Zealand

2390

Norway

2379

Pakistan

2427

Philippines

2424

Portugal

2436

Russia

2489

Singapore

2501

Spain

2149

Sweden

2499

Switzerland

2086

Thailand

2528

United Kingdom

2184

Operation Sound Effects

(Sound Feedback)

The player beeps when the following
operations are performed.
The default setting of the Sound Feedback
function is set to off.

Setting Sound Feedback

Press

[

on the player or the remote.

The power indicator lights up in green.
When there is a disc in the player, press

and remove the disc. Then press

again to close the disc tray.

Press and hold

on the player for

more than two seconds.

You will hear one beep and the Sound
Feedback function is turned on.

To turn off the Sound Feedback function

When there is no disc in the player, press and
hold

on the player for more than two

seconds. You will hear two beeps and the
Sound Feedback function is turned off.

Operation

Operation sound

Power is turned on

One beep

Power is turned off

Two beeps

is pressed

One beep

Operation is not possible Three beeps

[

Power indicator

[

Us
in

g Vari

ous

ddi
tiona
l Fun

Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote

By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.

Notes

• Depending on the unit being connected, you may

not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.

• If you enter a new code number, the code number

previously entered will be erased.

• When you replace the batteries of the remote, the

code number you have set may be reset to the
default setting. Set the appropriate code number
again.

Controlling TVs with the remote

Hold down TV

[

, and enter your TV’s

manufacturer’s code (see “Code
numbers of controllable TVs” below)
using the number buttons.

Release TV

[

The remote is set to perform the following:

* Once you set a code number for your AV

amplifier (receiver), the VOL +/– buttons on the
remote control the AV amplifier’s volume only. If
you would rather control the TV’s volume, set the
code number to “90” (default) to control the TV’s
volume again (page 62).

Code numbers of controllable TVs

If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.

[

Turns the TV on or off

VOL +/–*

Adjusts the volume of the TV

WIDE MODE

Switches to or from the wide
mode of a SONY’s wide TV

TV/VIDEO

Switches the TV’s input
source between the TV and
other input sources

[

VOL +/–