83
Set
tings
a
nd
Adj
u
st
m
e
nt
s
3
Set the following items in the
order that they are explained
below.
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that
only the “SIZE” setting does not return to the
default setting.
◆
SIZE
Selects the size of the speakers.
• FRONT
• CENTER
• REAR
• SUBWOOFER
Notes
• The cut off frequency for the subwoofer is fixed at
120 Hz.
• If your speakers are too small to reproduce low
bass frequencies, utilize a subwoofer for low
frequency sound. When you set the speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.
• Even if there are fewer than 6 speakers connected,
the player distributes the audio signal components
to the front speakers.
◆
DISTANCE
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“FRONT” first (
A
). Then adjust the values in
“CENTER” (centre speaker
B
), “REAR”
(rear speaker
C
), and “SUBWOOFWER”
(
D
) to reflect the actual distance to your
centre speaker, rear speakers, and subwoofer.
Be sure to change the value in the Setup
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.
LARGE
Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
LARGE
Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
NONE
Select this if you do not connect
a centre speaker.
LARGE
Normally select this position.
SMALL
Select this when the speaker
cannot reproduce adequate bass
frequencies.
NONE
Select this if you do not connect
rear speakers.
YES
Select this if you connect a
subwoofer to output the LFE
(low frequency effect) signals
from the subwoofer.
NONE
Select this if you do not connect
a subwoofer.
FRONT
(3 m)
Set this between 1 and 15 m
in 0.05 m increments.
CENTER (3 m)
Set this within ±2 m of the
“FRONT” setting in 0.05 m
increments. For example, if
“FRONT” is set to 6 m,
“CENTER” can be set
between 4 and 8 m.
B
D
A
A
C
C
(1~15 m)
(1~15 m)
,
continued