38
Playing a disc frame by frame
using the click shuttle
(Jog mode)
1
Press JOG on the remote.
“JOG” appears in the LCD screen.
2
Turn the click shuttle.
Depending on the turning speed,
playback goes to frame-by-frame
playback in the direction that the click
shuttle is turned. Turn the click shuttle
clockwise to go forward, and
counterclockwise to go backwards (DVD
only). If you turn the click shuttle at a
constant speed for a while, the playback
speed goes to slow or normal.
To return to normal play
Press
H
.
To turn off the Jog mode
Press JOG again so that “JOG” disappears
from the LCD screen.
Resuming Playback From
the Point Where You
Stopped the Disc
(Multi-disc
Resume)
The player stores the point where you stopped
the disc for up to 300 discs and resumes
playback the next time you insert the same
disc. When you store a resume playback point
for the 301st disc, the resume playback point
for the first disc is deleted.
1
While playing a disc, press
x
to
stop playback.
“RESUME” appears on the front panel
display.
2
Press
H
.
The player starts playback from the point
where you stopped the disc in step 1.
z
Hints
• To play from the beginning of the disc, press
x
twice, then press
H
.
• For DVD-RWs in VR mode, CDs, Super Audio
CDs, and DATA CDs, the player remembers the
resume playback point for the current disc unless
the disc tray is opened, the mains lead is
disconnected, or only for DATA CDs, the player
enters standby mode.
H
x
