79
Set
tings
a
nd
Adj
u
st
m
e
nt
s
◆
PAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
◆
PLAYBACK MEMORY
The player can store “SUBTITLE” and other
settings of each disc for up to 300 discs
(Playback Memory).
Set this function “ON” or “OFF.”
The following settings are stored in memory.
– ANGLE (page 60)*
– AUDIO (page 57)*
– BOOKMARK (page 51)**
– DISC MEMO (page 66)***
– VIDEO CONTOROL (page 62)**
– SUBTITLE (page 61)*
*
DVD VIDEO only
** DVD VIDEO/VIDEO CD only
*** DVD VIDEO/VIDEO CD/Super Audio CD/
CD only
Note
The player can store the settings of up to 300 discs.
When you store the setting of disc number 301, the
first disc setting is cancelled.
◆
TRACK SELECTION (DVD VIDEO only)
Gives the sound track which contains the
highest number of channels priority when you
play a DVD VIDEO on which multiple audio
formats (PCM, MPEG audio, DTS, or Dolby
Digital format) are recorded.
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 75).
• If PCM, MPEG audio, DTS, and Dolby Digital
sound tracks have the same number of channels,
the player selects PCM, MPEG audio, DTS, and
Dolby Digital sound tracks in this order.
◆
MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 300 different DVD VIDEO/
VIDEO CD discs (page 38).
◆
BOOKMARK RESET
t
Resets the bookmarks. Select this and press
ENTER. The “BOOKMARK RESET”
display appears. Press ENTER again to erase
all of the bookmarks in all of the discs.
◆
CD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs. This setting will be
activated when you open or close the disc
tray.
This function affects the output from the
following jacks:
– AUDIO OUT L/R jacks
– LINE 1 (RGB)-TV jack
– 5.1CH OUTPUT jacks
Note
If you select “ON” when playing CDs with DTS
tracks, the sound will become noisy.
AUTO
The picture, including subjects
that move dynamically, is
output with no jitter. Normally
select this position.
FRAME
The picture, including subjects
that do not move dynamically,
is output in high resolution.
ON
Stores the settings in memory
when you eject the disc.
OFF
Does not store the settings in
memory.
OFF
No priority given.
AUTO
Priority given.
ON
Stores the resume settings in
memory for up to 300 discs
(The settings remain in memory
even if you select OFF.)
OFF
Does not store the resume
settings in memory. Playback
restarts at the resume point only
for the current disc in the player.
OFF
Select this when playing CD
discs, including CDs with DTS
tracks.
ON
Eliminates the use of
unnecessary circuits when
playing CDs.
