10
To connect to your audio component
Select one of the following patterns,
A
or
B
,
according to the input jack on your audio
component.
z
For correct speaker location, see the operating
instructions supplied with the connected
components.
A
Digital audio input jack
If your audio component has a Dolby*
1
Digital, DTS*
2
, or MPEG audio decoder and
a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effect.
*1
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
*2
Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are
registered trademarks and DTS Digital Out and
the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All
Rights Reserved.
b
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 13).
If your audio component has an MPEG audio
decoder function, set “MPEG” to “MPEG” in
“AUDIO SETUP” (page 32). Otherwise, no
sound or a loud noise will come from your
speakers.
• The TVS effects of this player cannot be used
with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE (RGB)-TV (SCART)
jack or AUDIO OUT L/R jacks, even if you set
“DTS” to “ON” in Quick Setup (page 13).
B
Audio L/R (left/right) input jacks
This connection will use your audio
component’s two speakers for sound.
LINE
(RGB)
-TV
DIGITAL OUT
COAXIAL
AUDIO OUT
L
R
B
A
DIGITAL OUT
COAXIAL
AUDIO OUT
L
R
to DIGITAL OUT (COAXIAL)
CD/DVD player
Coaxial digital cable
(not supplied)
to coaxial
digital input
Audio component
with a decoder
: Signal flow
Audio component
to audio L/R input
Audio cable
(not supplied)
to AUDIO OUT L/R
(red)
(white)