H
ook
up
s
9
US
Hookups
When unpacking, check the supplied accessories by referring to page 36.
b
• Plug cables securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• Be sure to disconnect the power cord of each component before connecting.
Step 1: Connecting to Your TV
Connect this player to your TV monitor using a video cable. Select pattern
A
or
B
, according
to the input jack on your TV monitor, projector, or audio component.
A
Audio/video input jacks
You will enjoy standard quality images.
B
Component video input jacks
(Y, P
B
, P
R
)
You will enjoy accurate color reproduction
and high quality images.
b
Connect the supplied audio cable to audio input
jacks (L/R) on your TV.
When connecting to a wide screen TV
Depending on the disc, the image may not fit
your TV screen. To change the aspect ratio,
see page 27.
b
Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the TV
screen. If your TV has only one audio/video input
jack, connect the player to this jack.
VIDEO
P
B
Y
L
R
P
R
COAXIAL
VIDEO OUT
AUDIO OUT
COMPONENT
VIDEO OUT
DIGITAL
OUT
A
VIDEO
INPUT
AUDIO
L
R
P
R
P
B
Y
COMPONENT
VIDEO IN
B
Audio/video cable (supplied)
Component video
cable (not supplied)
(yellow)
TV
(green)
TV
(red)
(green)
(blue)
(red)
to VIDEO OUT
: Signal flow
CD/DVD player
to COMPONENT
VIDEO OUT
(blue)
(yellow)
(white)
(red)
(white)
(red)
to AUDIO OUT
,
continued