36
b
If each of the front or rear speakers are not placed at
an equal distance from your listening position, set
the distance according to the closest speaker.
◆
LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
◆
LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
◆
TEST TONE
The speakers will emit a test tone. Use this
when you use the AUDIO OUT (5.1CH)
jacks and adjust “LEVEL (FRONT)” and
“LEVEL (REAR).”
z
To adjust the volume of all the speakers at one time,
use the audio component’s volume control.
b
The test tone signals are not output from the
DIGITAL OUT (COAXIAL) jack.
SUBWOOFER
(3m)
Set this within –1.6 and
+0.6 m of the “FRONT”
setting in 0.2 m increments.
For example, if “FRONT”
is set to 6 m,
“SUBWOOFER” can be
set between 4.4 and 6.6 m.
L (0 dB)
Set this between –6 dB and 0
dB in 1 dB increments.
R (0 dB)
Set this between –6 dB and 0
dB in 1 dB increments.
CENTRE
(0 dB)
Set this between –12 dB and
0 dB in 1 dB increments.
SUBWOOFER
(0 dB)
Set this between –15 dB and
0 dB in 1 dB increments.
L (0 dB)
Set this between –12 dB and
0 dB in 1 dB increments.
R (0 dB)
Set this between –12 dB and
0 dB in 1 dB increments.
OFF
The test tone is not emitted
from the speakers.
ON
The test tone is emitted from
each speaker in sequence while
adjusting level.
