Sony DVP-SR760H Reference Manual Download

Page: 8 / 16

MODE (PROGRESSIVE)

: If you select

“AUTO,” the player detects the format (film-
based or video-based), and converts to the
appropriate version.

4:3 OUTPUT

: This setting is effective only

when you set “TV TYPE” to “16:9.” Select
“FULL” when you can change the aspect ratio
on your TV.

CUSTOM SETUP

AUTO STANDBY

: Sets the Auto Standby

setting on or off. If you select “ON,” the player
enters standby mode when left in stop mode for
more than 30 minutes.

AUTO PLAY

: When set to “ON,” the player

automatically starts playback when the player is
turned on by a timer (not supplied).

PAUSE MODE

: Selects the picture in pause

mode. Normally select “AUTO.” When the
picture is output in high resolution, set to
“FRAME.” (DVD only)

TRACK SELECTION

: Gives the sound track

which contains the highest number of channels
priority when you play a DVD VIDEO on
which multiple audio formats (PCM, MPEG
audio, DTS, or Dolby Digital format) are
recorded. If you select “AUTO,” priority is
given. (DVD VIDEO only)

IMAGE QUALITY

: Selects the priority

display to either high quality image or quick
speed. (Photo files only)

MULTI-DISC RESUME

: Switches the Multi-

disc Resume setting on or off. Resume playback
can be stored in memory for up to 6 different
DVD VIDEOs/VIDEO CDs. If you start the
settings again, the resume point is cleared.
(DVD VIDEO/VIDEO CD only)

AUDIO SETUP

AUDIO DRC (Dynamic Range Control)

Set according the surrounding environment. Set
to “TV MODE” when the smallest sounds are
indiscernible, or set to “WIDE RANGE” when
the listening environment is good, for example,
in a home movie theatre.

DOWNMIX

: Switches the method for

mixing down to 2 channels when you play a
DVD which has rear sound elements (channels),
or is recorded in Dolby Digital format.
Normally select “DOLBY SURROUND.”

DIGITAL OUT

: Selects if audio signals are

output via the DIGITAL OUT (COAXIAL)/
HDMI OUT jack. When you select “ON,” set
also the following “DOLBY DIGITAL,”
“MPEG,” “DTS,” or “48kHz/96kHz PCM.”

DOLBY DIGITAL

: Selects the type of Dolby

Digital signal. Set to “D-PCM” when the player
is connected to an audio component without a
built-in Dolby Digital decoder.

MPEG

: Selects the type of MPEG audio signal.

Set to “MPEG” when the player is connected to
an audio component with a built-in MPEG
decoder.

DTS

: Selects the type of DTS audio signal. Set

to “ON” when you play a DVD VIDEO with
DTS sound tracks. Do not set to “ON” when
you connect the player to an audio component
without a DTS decoder.

48kHz/96kHz PCM

: Selects the sampling

frequency of the digital audio output signal.
(DVD VIDEO only)

HDMI SETUP

You can adjust items related to HDMI
connection.

HDMI RESOLUTION

: Selects the type of

video signal output from the HDMI OUT jack.
If “AUTO (1920×1080p)” (default) is selected,
the player outputs video signals of the highest
resolution acceptable for your TV. If the picture
is not clear, unnatural or otherwise not to your
satisfaction, try another option that suits the
disc, TV/projector, etc. For details, refer also to
the instruction manual supplied with the TV/
projector, etc.
You cannot select this when “JPEG
RESOLUTION” is set to “PhotoTV HD.”

JPEG RESOLUTION

: Selects the type of

JPEG resolution so that you can enjoy a high
picture quality via HDMI connection.
This setting is effective only when you set “TV
TYPE” to “16:9.” You cannot select this when
“HDMI RESOLUTION” is set to “720×480/
576p.” “(1920×1080i) HD

” and

“(1920×1080i) HD” are effective only when
you set “HDMI RESOLUTION” to
“1920×1080i.” If you set this setting to
“PhotoTV HD,” “(1920×1080i) HD

” or

“(1920×1080i) HD,” the effect, rotation, and
zoom functions are not available.

/RGB (HDMI)

: Selects the type of

HDMI signal output from the HDMI OUT jack.
Set to “RGB” if the playback picture is
distorted. You cannot select this when “JPEG
RESOLUTION” is set to “PhotoTV HD.”

AUDIO (HDMI)

: Selects the type of audio

signal output from the HDMI OUT jack. Set to
“PCM” if you connect the player to a TV that is
not compatible with DOLBY DIGITAL/DTS/
MPEG signals.