29
Audio settings
— Audio setup
“AUDIO SETUP” allows you to adjust the sound
according to playback conditions and connected
equipment.
Select “
” (AUDIO SETUP) in the Setup
menu, then select the desired setting item.
For details on the setup procedures, see “Using
the Setup menu” (page 26).
The setting items with “*” in the tables below are
the default settings.
AUDIO ATT (attenuation)
Reduces the audio output level if the playback
sound is distorted.
This setting affects the outputs of FRONT/REAR
AUDIO OUT.
AUDIO DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
“AUDIO DRC.”
This setting affects the outputs of FRONT/REAR
AUDIO OUT.
DOWNMIX
Switches the method for mixing down to 2
channels when you play a DVD which has rear
sound elements (channels) or is recorded in
Dolby Digital format. For details on the rear
signal components, see “Checking the program
format” (page 20). This setting affects the output
of FRONT/REAR AUDIO OUT.
Additional Information
Maintenance
Fuse replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit, as this
could damage the unit.
OFF*
Normally, select this position.
ON
Reduces the audio output level.
Select this if the playback sound from
the speakers is distorted.
STANDARD* Normally select this position.
WIDE
RANGE
Gives you the feeling of being at
a live performance.
SURROUND* Select this when the unit is
connected to an audio
component that conforms to
Dolby Surround (Pro Logic).
NORMAL
Select this when the unit is
connected to an audio
component that does not
conform to Dolby Surround
(Pro Logic).
continue to next page
t
Fuse
