SPECIFICATIONS
ECM-322BC
ECM-322BMP
Capsule type
Electret condenser
Directivity
Omni-directional
Frequency response
50 Hz to 18 kHz
Sensitivity (0 dB=1 V/Pa, at 1 kHz)
-42 dB (7.94 mV) ±3dB
Output impedance at 1 kHz
1.4 k
Ω
±30% (unbalanced)
Dynamic range
81 dB or more
Signal-to-noise ratio (A-weighted, 1 kHz, 1 Pa)
60 dB or more
Inherent noise (0 dB SPL = 2E-5 Pa)
34 dB SPL or less (IEC 179, A-weighted)
Wind noise
55 dB SPL or less
Maximum input sound pressure level
115 dB SPL
Power requiements
DC 2 V to 10 V
Current drain
1.3 mA or less
Connector type
SMC9-4P
3-pole locking mini plug
Cable length
3.9 feet (1.2 m)
Dimensions
ø
11
/
32
(capsule case) x 6
5
/
8
inches
ø8.4 (capsule case) x 168 mm
Weight
0.4 oz (10 g) without connector
Supplied accessories
Headband (x1), clip (x1), carrying case (x1), operating instructions (x1)
CHOICE OF MODELS
ECM-322BC with WRT-822B
ECM-322BMP with bodypack transmitter included in
the UWP-C1/S1/X1 package
ECM- 322BC
: Supplied with a Sony 4-pin connector (SMC9-4P) for use with the WRT-8B/822A/822B bodypack transmitter
ECM- 322BMP
: Supplied with a 3-pole locking mini plug for use with the bodypack transmitter included in UWP series
100 Hz
1 kHz
10 kHz
–30
–40
–50
–60
–70
–80
20
100
50
200
500
1k
2k
5k
10k
20k
Response (dB)
Frequency (Hz)
0º
90º
180º
Directivity Characteristics
Frequency Response Characteristics
A-1157
Printed in U.S.A. 4/07
Sony Electronics Inc.
One Sony Drive
•
Park Ridge, NJ 07656
www.sony.com/ProAudio
©2007 Sony Electronics Inc. All rights reserved.
Reproduction in whole or in part without written permissions is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony is a trademark of Sony.
MK10338V3
