Chapter 2 Introduction to Editing Operations
Chapter 2
Introduction to Editing Operations
35
3
Play back the tape in player 1 to find the desired scene.
Use the following buttons.
You can also perform the same operations with the control panel.
4
Specify the start (IN point) of the video clip.
Video Clip Editor: Click the MARK IN button at the desired scene.
Control panel: Press the MARK IN button at the desired scene.
(Continued)
1
2
3
4
Ø
ø
PLAY button
[ES]
button
MARK OUT button
MARK IN button
Search dial
Press the search dial to toggle it
between shuttle and jog mode.
(Depressed position): Jog mode
(Raised position): Shuttle mode
Operation
Video Clip Editor operation
Control panel operation
Normal
playback
Click
”
.
Press the PLAY button.
Reverse
playback
Click
“
.
In shuttle mode, rotate the search
dial slightly in the counterclockwise
direction.
High-speed
search
Click
0
or
)
.
In shuttle mode, rotate the search
dial all the way in the clockwise or
counterclockwise direction.
Low-speed
search
Click
1“
or
”1
for frame-by-
frame playback.
In jog mode, rotate the search dial
slowly.
Still
playback
Click the STILL button.
Move the search dial to the center
position. If the STILL function has
been assigned to the
[ES]
button,
press the
[ES]
button.
MARK IN button
MARK OUT button