O
v
er
v
iew
Location and Function of Parts
5
GB
Location and Function
of Parts
This manual focuses on the operations of the RM-
BR300 when it is used with cameras other than BRC-
300/300P.
For operations with the BRC-300/300P, refer to the
Operating Instructions supplied with the BRC-300/
300P.
Front
A
LOCK button and indicator
Press the LOCK button for more than one second,
and the LOCK indicator lights and the values set by
the VALUE/R, BRIGHT/B and FOCUS controls
are locked. (The indicators of the locked controls
are turned off.).
The AUTO/MANUAL button is also disabled.
Press the LOCK button for more than one second
again to unlock the controls and buttons.
B
VALUE/R control
When the brightness adjustment mode is selected
with the MODE button (with the VALUE indicator
lit), this control adjusts the value of the item
(SHUTTER or IRIS) selected on the camera.
When the white balance adjustment mode is
selected with the MODE button (with the R
indicator lit), this control adjusts the R. GAIN (red
gain) (except the EVI-D30/D30P).
When the VALUE indicator is lit, the function of
the control varies according to the exposure mode
selected on the camera. For details, see “Functions
of the VALUE and BRIGHT controls” on page 5.
C
BRIGHT/B control
When the brightness adjustment mode is selected
with the MODE button (with the BRIGHT
indicator lit), this control adjusts the value of the
brightness of the camera, etc.
When the white balance adjustment mode is
selected with the MODE button (with the B
indicator lit), this control adjusts the B. GAIN (blue
gain) (except the EVI-D30/D30P).
When the BRIGHT indicator is lit, the function of
the control varies according to the exposure mode
selected on the camera. For details, see “Functions
of the VALUE and BRIGHT controls” on page 5.
Functions of the VALUE and BRIGHT controls
The functions of the VALUE control and the BRIGHT
control change according to the exposure mode setting
on the camera, as follows:
* When the exposure compensation function is activated
on the camera.
D
MODE button
Press this button to select the function of the
VALUE/R control and BRIGHT/L control.
When the brightness adjustment mode is selected,
the VALUE and BRIGHT indicators are lit.
When the white balance adjustment mode is
selected, the R and B indicators are lit.
E
FOCUS control
This control is enabled when MANUAL is selected
with the AUTO/MANUAL button. Turn the control
counterclockwise (toward NEAR) to focus on a
near subject, and clockwise (toward FAR) to focus
on a far subject.
1
1
9
LOCK
MODE
VALUE
RESET
MENU
PRESET
SHIFT
L/R
DIRECTION
PANEL
LIGHT
BLACK
LIGHT
PAN-TILT
RESET
ONE PUSH
AWB
POWER
AUTO
MANUAL
AUTO
ONE PUSH
AF
2
3
4
5
6
7
2
10
STD
REV
3
11
4
POSITION
CAMERA
12
5
13
6
14
7
15
8
16
R
–
+
BRIGHT
B
–
+
FOCUS
NEAR
FAR
1
8
qh qj qk
ql
w;
90qaqsqd
qf
qg
2
3
4
5
6
7
Exposure mode
on the camera
Function of
VALUE control
Function of
BRIGHT control
FULL AUTO
Not used
Exposure
compensation level
control*
SHUTTER Pri
Shutter speed
control
Exposure
compensation level
control*
IRIS Pri
Iris control
Exposure
compensation level
control*
BRIGHT
Not used
Brightness level
control
MANUAL
Shutter speed
control
Iris control
Summary of Contents for EVI-D70/W
Page 37: ......
Page 73: ......
Page 91: ......
Page 92: ...Printed in Japan この説明書は 100 古紙再生紙を使用しています Printed on 100 recycled paper ...
