Thread USB cable through the opening in the cover.
Locate the port with a USB symbol.
Insert USB port connector into USB port of the iMac computer.
Insert the “Mac Software” CD in the built-in CD-ROM drive and follow
the installation instructions.
The USB drive is now ready to use!
Hardware installation 17
1
2
1
2
Step 3: Attaching USB drive to Mac
The following example will be for an iMac. G3 computers equipped with
USB have a visible connector on the back, much like a PC.
Unpack the included materials and locate the USB port symbol on the
drive.
Attach power cable, then USB cable to drive’s USB interface connector.
Switch the drive on.
Open cover to iMac ports.
16 Hardware installation
