SRS-XB33_AU/IN (GB) 5-012-981-41(1)
5-012-981-
41
(1)
SRS-XB33
©2020 Sony Corporation
Printed in China
Wireless Speaker
Reference Guide
Others
ˎ
ˎ
Do not use or leave the unit in an extremely cold or hot environment (temperature outside the range
of 5 °C – 35 °C). If the unit is used or left in outside the above range, the unit may automatically stop to
protect internal circuitry.
ˎ
ˎ
At high temperature, the charging may stop or the volume may reduce to protect the battery.
ˎ
ˎ
Even if you do not intend to use the unit for a long time, charge the battery to its full capacity once
every 6 months to maintain its performance.
About the Voice Guidance
IMPORTANT: THE SOUND GUIDANCE IS AVAILABLE IN THIS PRODUCT ONLY IN ENGLISH
Depending on the status of the unit, the voice guidance outputs from the unit as followings.
ˎ
ˎ
When entering pairing mode: “BLUETOOTH pairing”
ˎ
ˎ
When establishing a BLUETOOTH connection: “BLUETOOTH connected”
ˎ
ˎ
When disconnecting a BLUETOOTH connection: “BLUETOOTH disconnected”
ˎ
ˎ
When pressing the BATT (battery) button to check the battery power during the unit is turned on:
“Battery fully charged/Battery about 70%/Battery about 50%/Battery about 30%/Please charge”
ˎ
ˎ
When pressing and holding the ST PAIR button during the Stereo Pair function: “Left/Right”
On Copyrights
ˎ
ˎ
Android, Google Play and other related marks and logos are trademarks of Google LLC.
ˎ
ˎ
LDAC™ and LDAC logo are trademarks of Sony Corporation.
ˎ
ˎ
The BLUETOOTH® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony Corporation is under license.
ˎ
ˎ
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in
other countries.
ˎ
ˎ
Apple, the Apple logo, iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S.
and other countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
ˎ
ˎ
Use of the Made for Apple badge means that an accessory has been designed to connect specifically
to the Apple product(s) identified in the badge, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with an Apple product may affect wireless performance.
ˎ
ˎ
USB Type-C® and USB-C® are trademarks of USB Implementers Forum.
ˎ
ˎ
Other trademarks and trade names are those of their respective owners.
ˎ
ˎ
™ and ® marks are omitted in the documents.
Notes on waterproof and dust proof features
(Read before using the unit)
Waterproof and dust proof performance of the unit
The unit, with the cap fastened securely, has a waterproof specification of IPX7*
1
as specified in “Degree
of protection against water immersion” of the IEC60529 “Ingress Protection Rating (IP Code)”*
3
, and a
dust proof specification of IP6X*
2
as specified in “Degrees of protection against solid foreign objects”*
3
.
Liquids that the waterproof performance specifications apply to
Applicable
fresh water, tap water, pool water, salt water
Not applicable
liquids other than the above (soapy water, water with detergent or bath
agents, shampoo, hot spring water, etc.)
*
1
IPX7 (Degree of protection against water immersion): For details, refer to the Help Guide.
*
2
IP6X (Degrees of protection against dust): For details, refer to the Help Guide.
*
3
The supplied accessories and the connectors of this unit (USB) are neither waterproof nor dust proof.
To reduce the risk of fire or electric shocks, do not expose the unit to water or droplets while using
either or both of the connectors (USB). Do not place a vase or any other liquid-filled container on the
unit.
The waterproof and dust proof performance of the unit is based on our measurements under the
conditions herein described. Note that malfunctions as a result of water immersion or dust intrusion
caused by misuse by the customer are not covered by the warranty.
To avoid deterioration of waterproof and dust proof performance
Check the following and use the unit correctly.
ˎ
ˎ
The unit passes the drop test from 1.22 m on plywood of 5 cm thickness conforming to MIL-STD810H
Method 516.8-Shock. However, this does not guarantee no damage, no breakdown, or waterproof and
dust proof performance in all conditions. Deformation or damage from dropping the unit or
subjecting it to mechanical shock may cause deterioration of the waterproof and dust proof
performance.
ˎ
ˎ
This unit does not have a design that is resistant to water pressure. Use of the unit in a location where
high water pressure is applied, such as in the shower, may cause a malfunction.
ˎ
ˎ
Do not pour high-temperature water or blow hot air from a hair dryer or any other appliance on the
unit directly. Also never use the unit in a place subject to high temperatures, such as in a sauna or
near a heat source.
ˎ
ˎ
Handle the cap with care. The cap plays a very important role in maintenance of the waterproof and
dust proof performance. When using the unit, make sure that the cap is closed completely. When
closing the cap, be careful not to allow foreign objects inside. If the cap is not closed completely the
waterproof and dust proof performance may deteriorate and may cause a malfunction of the unit as a
result of water or dust particles entering the unit.
Cap
Passive radiator
English
Wireless speaker
Before operating the unit, please read this guide thoroughly and retain it for future reference.
Please access the following URL and read the contents of the END USER LICENSE AGREEMENT.
https://rd1.sony.net/help/speaker/el20/h_zz/
CAUTION
Do not place this product close to medical devices
This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable
shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to
persons who use such medical devices. Consult your doctor before using this product if you use any
such medical device.
This equipment has been tested and found to comply with the limits set out in the EMC regulation using
a connection cable shorter than 3 meters.
Caution on charging
Inserting the USB plug while it is wet may cause a short circuit due
to foreign matter or liquid (tap water, salt water, soft drinks, etc.)
getting on the main unit or charging cable. This may cause
malfunctions or abnormal overheating.
Never insert the USB plug while the main unit or
charging cable is wet.
Precautions
On safety
ˎ
ˎ
If your skin touches this product for a long time when the power is on, it may cause a low
temperature injury.
ˎ
ˎ
Important information such as the model name is located on the inner surface of the cap on the rear
side of the unit.
On placement
ˎ
ˎ
To eliminate the risk of malfunctions, avoid the following locations when placing or leaving this unit.
– A place subject to high temperatures, such as under direct sunlight or lighting equipment, near a
heat source, or in a sauna
– Inside a vehicle with the windows closed (especially in summertime)
– A place subject to excessive dust
– A place subject to strong vibration
ˎ
ˎ
Place this unit on a flat, level surface. When placed on a sloped surface, the unit may fall over or fall off
the surface due to its own vibration, resulting in injuries, malfunctions, or performance degradation.
ˎ
ˎ
Depending on the conditions where this unit is placed, it may fall over or fall off the surface. Do not
leave any valuables near the unit.
ˎ
ˎ
This unit is not anti-magnetic. Keep objects susceptible to magnetism (recorded tapes, watches, cash
cards and credit cards with magnetic coding, etc.) away from the unit. When you carry around the
unit, keep this in mind as well.
