21
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Satellite Receiver
To connect a satellite receiver
1
Connect the satellite antenna cable to the satellite receiver’s
satellite input jack.
2
Use an A/V cable to connect the satellite receiver’s A/V output
jacks to the TV’s A/V input jacks.
3
Connect a CATV cable from your cable or antenna to the satellite
receiver’s VHF/UHF input jack.
4
Use a coaxial cable to connect the satellite receiver’s VHF/UHF
output jack to the TV’s VHF/UHF input jack.
5
Run the satellite receiver’s setup program (see the satellite
receiver’s manual for details).
Notes on Using This Connection
Using
S VIDEO jacks?
See page 15.
To Do This ...
Do This ...
Watch the satellite receiver
Press
TV/VIDEO
repeatedly to select the satellite receiver input
(VIDEO 1 in the illustration).
Set up the TV remote control to operate the
satellite receiver
If you have a non-Sony satellite receiver, you must program
the remote control. See “Programming the Remote Control”
on pages 37-38.
Activate the TV remote control to operate
the satellite receiver
Press
SAT/CABLE FUNCTION
.
Control satellite receiver functions with the
TV remote control
See “Operating a Satellite Receiver” on page 43.
Label video inputs to easily identify
equipment connected to the TV
See the instructions for setting up Video Labels on pages 58-
59.
Satellite antenna
cable
A/V cable
CATV cable
TV
Satellite receiver
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
HS420.book Page 21 Friday, February 20, 2004 11:15 AM