38
SETU
P
SETU
P
S
E
TU
P
SETU
P
Set
up
SETU
P
Setting Up the Channel List
After you finish connecting your TV, you need to run Auto Setup to
set up your channels. The Auto Setup screen appears when you turn
on your TV for the first time after hooking it up. If you do not want to
set up the channels at this time, you can do it later by selecting the
Auto Program option in the Channel Menu (see page 68).
Using Auto Setup
1
Press
POWER
to turn on the TV.
2
Press
TV FUNCTION
on the remote control.
3
To continue running Auto Setup, press
CH+
. To exit Auto Setup,
press
CH-
.
Auto Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To reset the TV to factory settings
1
Press
POWER
to turn on the TV.
2
Hold down
RESET
on the remote control.
3
Press
TV POWER
on the TV. (The TV will turn itself off, then back
on.)
4
Release
RESET
.
✍
The Auto Setup feature does not apply for installations that use a cable box
for all channel selection.
32_36HS.book Page 38 Friday, February 7, 2003 11:15 AM
