Using Your New TV
6
Sony KV-XJ29 Group N30 Dummy_4-091-294-E4 (1)
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
To watch the video input of the connected equipment, press VIDEO (see page 12).
Connecting a camcorder/video game equipment
using the VIDEO 2 INPUT jacks
Notes
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
PAL, NTSC and SECAM video signals when using VIDEO IN 1 or 2 jacks
at the rear of your TV or the VIDEO 2 INPUT jacks at the front of your TV.
• You can also connect video equipment to the VIDEO IN 1 or 2 jacks at the
rear of your TV.
• Do not connect video equipment to the VIDEO 2 INPUT jacks at the front
and the VIDEO IN 2 jacks at the rear of your TV at the same time;
otherwise the picture will not be displayed properly on the screen.
Connecting audio/video equipment using the
MONITOR OUT jacks
Note
• If you select “DVD” on your TV screen, the signal from the MONITOR OUT
jacks will not be output properly. This does not indicate a malfunction.
Front of TV
Camcorder
Video game
equipment
To video and
audio outputs
: Signal flow
To VIDEO 2 INPUT
or
Audio/Video cable (not supplied)
R
VIDEO 2 INPUT
VIDEO
L
(MONO)
AUDIO
R
L
Y
C
B
C
R
COMPONENT VIDEO (DVD) IN
VIDEO
AUDIO
R
MONITOR
OUT
VIDEO
IN
VIDEO (yellow)
AUDIO-L
(MONO) (white)
AUDIO-R (red)
Rear of TV
To
antenna
output
To video and
audio inputs
Audio system
To
audio
inputs
VCR
: Signal flow
To
MONITOR
OUT
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
or
01GB03GET-TWN.p65
18/03/04, 09:33
6
Black
