Sony FD Trinitron WEGA KV-XR29M80 Service Manual Download

Page: 162 / 191

Additional Information

Sony KV-XR34M61 Group C5 (

)_4-100-030-11 (1)

Good morning!

Possible cause

Solutions

Page

Picture slant

Abnormal color
patches

TV cannot
receive stereo
broadcast sound.

Stereo broadcast

sound switches
on and off or is
distorted
(KV-XR34M61/
XR29M61/
XR25M60 only).

“100” appears at
the top of the
screen and there
is no Teletext
display
(KV-XR34M61/
XR29M61 only).

Teletext display is
incomplete
(snowy picture
or double images)
(KV-XR34M61/
XR29M61 only).

Symptom

• The magnetic

disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.

• The magnetic

disturbance from
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• The channel carries no

Teletext broadcast.

• Connection is loose or

the cable is damaged.

• The antenna setup is

inappropriate.

• Signal transmission

is too low.

• Keep external speakers or other electrical

equipment away from the TV.

• Display the “Setup” menu and adjust

“Picture Rotation” so that the picture
position is optimal.

• Keep external speakers or other

equipment away from the TV. Do not
move the TV while the TV is turned on.
Press

(main power) on the TV to turn

off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup. Contact a Sony

dealer for advice.

—

• Check the antenna cable and connection

on the TV, VCR, and at the wall.

• Check the antenna setup. Contact a Sony

dealer for advice.

• Try using a booster.

• Use the fine tuning (“Fine”) function.

–

continued

01GB08ADV-THA.p65

27/9/03, 9:02 AM

Black

Summary of Contents for FD Trinitron WEGA KV-XR29M80
































































































































































































Search results

Summary of Contents for FD Trinitron WEGA KV-XR29M80

Reviews:

Related manuals for FD Trinitron WEGA KV-XR29M80

Brands by name

Popular brands

Sony FD Trinitron WEGA KV-XR29M80, Service Manual

Search results

Summary of Contents for FD Trinitron WEGA KV-XR29M80

Reviews:

Related manuals for FD Trinitron WEGA KV-XR29M80

Brands by name

Popular brands