When selecting 30p or 60p
00:00:00:00 - 23:59:59:29
When selecting 25p or 50p
00:00:00:00 - 23:59:59:24
When selecting 24p, you can set the last 2 time code digits of the frames in multiples of 4,
between 0 and 23.
RESET:
Initializes the time code.
Press the ENTER button to display [SURE?] while [OK] is displayed, then press the
ENTER button again.
FORMT:
Selects the time code recording method.
DF:
Records the time code in drop frame.
NDF:
Records the time code in non-drop frame.
In the following situations, the time code is fixed to [NDF].
When [VMODE] is set to 24p
When [V.SYS] is set to [PAL]
RUN:
Sets how the time code advances.
REC:
The time code advances only while recording XAVC S movies. It is recorded
sequentially from the time code on the image recorded last time.
FREE:
The time code advances sequentially, regardless of the operation of the camera.
MAKE:
Sets the time code to be recorded.
PrSet:
The newly set-up time code is recorded on recording media.
REGEN:
The last time code of the previous recording is read out from the recording
media and the new time code is recorded sequentially from the last time code.