13
Boosting the bass sound
— D-bass
You can enjoy a clear and powerful bass
sound. The D-bass function boosts the low
frequency signal with a sharper curve than
conventional bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
easily with the D-BASS control.
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2, or 3).
“D-BASS” appears in the display.
To cancel, turn the control to OFF.
Note
If the bass sound becomes distorted, adjust the
D-BASS control or volume.
Level
Frequency (Hz)
0dB
D-BASS 3
D-BASS 2
D-BASS 1
With Optional Equipment
CD/MD Unit
(XR-C5120 only)
This unit can control a maximum of ten
external CD/MD units in this configuration:
CD unit – maximum of five
MD unit – maximum of five
Any combination up to ten will work.
Playing a CD or MD
1
Press
(SOURCE)
repeatedly to select CD
or MD.
2
Press
(MODE)
until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Changing the display item
Each time you press
(DSPL)
during CD, or
MD playback, the item changes as follows:
$
Elapsed playback time
$
Disc name
*
1
$
Track name
*
2
$
Clock
*
1
If there is no disc name prerecorded on the MD,
“NO NAME” appears in the display.
*
2
If the track name of an MD is not prerecorded,
“NO NAME” appears in the display.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 12).
