FMP-X10 12
SECTION 2 - DISASSEMBLY/PART NUMBER INFORMATION
REPAIRING THE 4K MEDIA PLAYER
If the latest Software does not correct the issue, complete the following:
1.
Verify the unit has the symptom the customer indicated.
2.
Replace part causing the symptom.
3.
Install the latest version of Software (Required for ALL repairs).
4.
Perform the required service adjustments and checks.
5.
Verify the repair resolved the issue.
REMOVING THE BOTTOM COVER
1.
Gently place the 4K Ultra HD Media Player upside-down on its Top
Cover and remove 4 screws as shown.
2.
Place the unit face up to locate and remove the 2 screws.
3.
Turn the unit upside-down, then slide the Bottom Cover as shown to lift
and detach.
REMOVING THE TOP COVER
1.
Locate and unclamp the side clips, then turn the unit face up to slide the
unit as shown and lift to detach the Top Cover.
Top, Cover
Top, Cover
REMOVING THE TOP SHIELD
1.
Locate the 3 screws shown in the illustration to remove.
2.
Remove the 2 top screws shown in the illustrarion and lift the Top Shield
to detach.
Top, Shield
Top, Shield
