FMP-X10 22
SECTION 3 - UPDATES AND ADJUSTMENTS
10.
Press (Down arrow)
twice and then (Enter button)
to select the
*3 Boot Counter Reset
option.
DIGITAL (DIG_SRV_MODE) SERVICE
FACTORY SETTING
1 Shipment Setting
2 Boot Counter
* 3 Boot Counter Reset
11.
Press (Enter button)
as required on screen.
DIGITAL (DIG_SRV_MODE) SERVICE
FACTORY SETTING
1 Shipment Setting
2 Boot Counter
* 3 Boot Counter Reset
Press enter
12.
The Boot Counter Reset final screen will appear as shown:
DIGITAL (DIG_SRV_MODE) SERVICE
FACTORY SETTING
1 Shipment Setting
2 Boot Counter
* 3 Boot Counter Reset
Boot Count Reset is done
NETWORK TEST
1.
After accessing Service Mode, press (Cue button)
until
the
004 NETWORK
item shows on screen.
DIGITAL
SERVICE
003 DIG_SRV_MODE
004 NETWORK
2.
Press (Play button)
to enter the
004 NETWORK
item.
DIGITAL (DIG_SRV_MODE) SERVICE
NETWORK
*1 Display Information
3.
Press (Enter button)
as required on screen.
DIGITAL (DIG_SRV_MODE) SERVICE
NETWORK
*1 Display Information
Press enter
4.
Network information screen will appear as shown:
DHCP
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
MAC Adress
LINK
: OFF
: 192.168.0.11
:
:
:
:
: D8:12:56:98:CF:22
: OFF
