FMP-X10 23
SECTION 3 - UPDATES AND ADJUSTMENTS
HDD TEST
1.
After accessing Service Mode, press (Next button)
until
the
009 HDD
category shows on screen.
DIGITAL
SERVICE
009 HDD
001 SMART
2.
Press (Play button)
to enter the HDD menu.
If the HDD Model name appears on screen, press (Enter button)
.
DIGITAL (HDD)
SERVICE
SMART
*1 READ SMART DATA
HDD Model = XXXXXXX
Serial = XXXXXX
Firm = XXXX
NOTE:
If the HDD Model name is not displayed on screen,
the HDD unit may be broken and next steps could not be
performed.
3.
Press (Enter button)
as required on screen.
DIGITAL (HDD)
SERVICE
SMART
*1 READ SMART DATA
Press enter
HDD Model = XXXXXXX
Serial = XXXXXX
Firm = XXXX
4.
Confirm the HDD Smart data that will appear on screen.