14
z
Tips
• If you are farsighted and have a trouble seeing
images on the camcorder screen, you can attach
a 52 mm close-up lens (sold separately) to the
viewfinder lens adjustment ring.
The tape measure hook is attached at the
image sensor position.
When you want to measure the precise
distance between the image sensor and the
subject, hook the end of a tape measure
here.
The LCD panel is placed above the
centerline of the lens, on the same angle as
the lens views the subject, so the subject
will be captured as you see it. The LCD
screen can be rotated right or left, allowing
a person other than the camera operator to
see the image.
You can set and hold the LCD screen angle
by turning the LCD HOLD dial.
Loosen the LCD HOLD dial when you
change the angle.
Using the tape measure hook
Tape measure
hook
Using the LCD screen
180 degrees
150 degrees
90 degrees
