43
R
e
co
rd
in
g
/Pl
ay
bac
k
COPY
To copy the settings of the picture profile to
another picture profile number.
RESET
To reset the picture profile to the default
setting.
To copy the picture profile setting to
another picture profile number
See page 38 for the location of the buttons.
1
Press the PICTURE PROFILE button
B
.
2
Select the picture profile number that
you want to copy from with the SEL/
PUSH EXEC dial
A
.
3
Select [SETTING]
t
[COPY] with
SEL/PUSH EXEC dial
A
.
4
Select the number of the picture profile
that you want to copy to with the SEL/
PUSH EXEC dial
A
.
5
Select [YES] with the SEL/PUSH
EXEC dial
A
.
6
Select [
RETURN]
t
[OK] with the
SEL/PUSH EXEC dial
A
.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
See page 38 for the location of the buttons.
1
Press the PICTURE PROFILE button
B
.
2
Select the number of the picture profile
that you want to reset with the SEL/
PUSH EXEC dial
A
.
3
Select [SETTING]
t
[RESET]
t
[YES]
t
[
RETURN]
t
[OK]
with the SEL/PUSH EXEC dial
A
.
1
Press the MENU button during
standby.
2
Select (OTHERS)
t
[GPS
SETTING]
t
[ON] (default
setting) with the SEL/PUSH EXEC
dial.
appears, and your camcorder
starts trying to triangulate. When your
camcorder triangulates successfully, it
will record the location information at
the time movies were recorded.
b
Notes
• The indicator changes according to the strength
of GPS signal reception.
Acquiring location information
(GPS)
Tri-
angulating
status
GPS
indicators
GPS reception status
Function
off
No
indicator
[GPS SETTING] is
set to [OFF], or the
GPS receiver is not
functioning normally.
Difficult
The camcorder
cannot find a GPS
signal, therefore, it
cannot triangulate.
Use the camcorder in
an open area.
Searching
The camcorder is
searching the GPS
signal. It may take
several minutes until
the camcorder
triangulates.
Tri-
angulating
The camcorder is
receiving a weak GPS
signal.
Continued
,
