44
• [GPS SETTING] is set to [ON] in the default
setting. Movies recorded during triangulation by
GPS will be recorded with location information.
If you do not want to record location
information, set [GPS SETTING] to [OFF].
• If the GPS indicator does not become a
triangulating status indicator even after several
minutes, the camcorder is having trouble with
receiving GPS signals. You may start recording
if you do not need to record location
information, or go to a location with access to
the open sky.
• The camcorder can hardly receive GPS signals
indoors or near tall buildings. Go to a location
with access to the open sky.
• Even if a triangulating status indicator is
displayed, the camcorder may not record the
GPS information continuously, depending on
the condition of GPS signal reception.
The camcorder records movies
accompanied by time data, such as time
code and user bit.
Display the setting screen by pressing the
MENU button
t
select
(TC/UB SET)
with the SEL/PUSH EXEC dial.
1
Select [TC PRESET] with the SEL/
PUSH EXEC dial.
2
Select [PRESET] with the SEL/PUSH
EXEC dial.
3
Select the first 2 digits with the SEL/
PUSH EXEC dial.
You can set the time code between
00:00:00:00 and 23:59:59:24.
4
Set other digits by repeating step
3
.
5
Select [OK] with the SEL/PUSH EXEC
dial.
To reset the time code
You can reset the time code (00:00:00:00).
Select [RESET] in step
2
of “Presetting
To reset the time code using the
Wireless Remote Commander
You can reset the time code (00:00:00:00)
also by pressing the TC RESET button on
the Wireless Remote Commander.
1
Select [UB PRESET] with the SEL/
PUSH EXEC dial.
2
Select [PRESET] with the SEL/PUSH
EXEC dial.
3
Select the first 2 digits with the SEL/
PUSH EXEC dial.
4
Set other digits by repeating step
3
.
5
Select [OK] with the SEL/PUSH EXEC
dial.
To reset the user bit
You can reset the user bit (00 00 00 00).
Select [RESET] in step
2
of “Presetting
Tri-
angulating
The camcorder is
receiving a GPS
signal, and can
acquire location
information.
Tri-
angulating
The camcorder is
receiving a strong
GPS signal, and can
acquire location
information.
Setting time data
Presetting the time code
Tri-
angulating
status
GPS
indicators
GPS reception status
Presetting the user bit
Useful functions (Continued)
