48
You can review the most recently recorded
scene on the screen.
Right after you stop recording, press
the LAST SCENE button.
The camcorder plays from the top to the
end of the most recently recorded scene,
then returns to standby mode.
To stop reviewing the last scene
Press the LAST SCENE button during
playback. The camcorder returns to standby
mode.
z
Notes
• If you edit the movie or remove the recording
media after you stop recording, the Last Scene
Review function may not work correctly.
• You cannot use the Last Scene Review function
with SMOOTH SLOW REC.
Reviewing the most recently
recorded scene (Last Scene
Review)
Assigning the
functions to the
ASSIGN buttons
Some functions can be assigned to the
ASSIGN buttons for use. You can assign a
single function to any one of the ASSIGN 1
to 6 buttons.
See “Menu items” (p. 68) on the function of
each item.
Default function of each ASSIGN
button
• ASSIGN 1: ZEBRA (p. 76)
• ASSIGN 2: HISTOGRAM (p. 76)
• ASSIGN 3: SMOOTH SLOW REC
• ASSIGN 4: PEAKING (p. 76)
• ASSIGN 5: MARKER (p. 77)
• ASSIGN 6: LAST SCENE (p. 48)
Functions you can assign to the
ASSIGN buttons
• - (no function)
• LAST SCENE REVIEW (p. 48)
• WB PRESET (p. 33)
• AE SHIFT (p. 71)
• STEADYSHOT (p. 72)
• SMOOTH SLOW REC (p. 45)
• COLOR BAR (p. 72)
• HISTOGRAM (p. 76)
• ZEBRA (p. 76)
• PEAKING (p. 76)
• MARKER (p. 77)
• CAMERA DATA DISPLAY (p. 77)
• AUDIO LEVEL DISPLAY (p. 78)
• REC LAMP[F] (p. 82)
• REC LAMP[R] (p. 82)
• VISUAL INDEX (p. 50)
