FST-ZUX999.GB.4-148-130-11(1)
1
GB
Oper
ations
4
Prepare the transferring source.
For CD-USB synchronized
transfer:
Load a disc(s), and select either one
of the normal play modes or program
mode: “ALL DISC CONTINUE,”
“1 DISC CONTINUE,” “FOLDER
CONTINUE” or “PROGRAM”
(page 25). CD tracks or MP3 files
are transferred with the selected play
mode. To transfer only favourite
CD tracks or MP3 files with the
“PROGRAM” play mode, see
“Creating your own program” (page
40). If you transfer MP3 files in a
specific folder on the disc, select
“FOLDER CONTINUE” before
starting the transfer.
For CD-USB REC 1 transfer:
Load a disc(s), and then start
playback of a CD track or MP3 file.
For USB 1-USB synchronized
transfer:
Connect a USB device to the
(USB 1) port that contains audio files
you want to transfer, and then select
either one of the normal play modes
or program mode: “CONTINUE,”
“FOLDER CONTINUE” or
“PROGRAM” (page 37). Audio files
are transferred with the selected play
mode. To transfer only favourite
audio files with the “PROGRAM”
play mode, see “Creating your own
program” (page 40). If you transfer
audio files in a specific folder on
the USB device, select “FOLDER
CONTINUE” before starting the
transfer.
For USB 1-USB REC 1 transfer:
Connect a USB device to the
(USB 1) port that contains audio files
you want to transfer, and then start
playback of an audio file on the USB
device.
5
Start transferring.
For CD-USB synchronized
transfer:
Press REC TO
.
“SYNC” and “REC” light up in the
display. Then, transferring starts
when “Don’t Remove USB” appears
in the display. When the transfer is
completed, the access to the USB
device and the CD player stop
automatically.
For CD REC 1 transfer:
Press REC TO
.
“REC” lights up in the display. Then,
transferring starts when “Don’t
Remove USB” appears in the display.
When the transfer is completed,
the access to the USB device stops
automatically and the CD player
continues playback.
For USB1-USB synchronized
transfer:
Press REC TO
.
“SYNC” and “REC” light up in the
display. Then, transferring starts
when “Don’t Remove USB” appears
in the display. When the transfer is
completed, the access to the both USB
devices stop automatically.
Continued
