2-4
FWD-50PX1
3. AD Converter
Menu structure
This adjustment corrects non-uniformity among RGB (or
YCbCr) channels of AD converter (IC403).
a)
Cal Mode
Set to “On” to enter the calibration mode.
Off : Normal operation
On : Calibration mode
b) RGB Calibration
The RGB signals are calibrated.
The RGB signals are calibrated by “Sub Cont RGB”,
“Red Gain”, “Green Gain”, “Blue Gain”, “Red Bias”,
“Green Bias” and “Blue Bias” that are located in the
lower layer below this sub menu.
Adjustment range is from 0 to 255 in each adjustment
item.
c)
YUV Calibration
The component video signal is calibrated.
The component video signal is calibrated by “Sub
Cont YUV”, “Sub Brt YUV”, “Cb Offset YUV” and
“Cr Offset YUV” that are located in the lower layer
below this sub menu.
Adjustment range is from 0 to 255 for “Sub Cont
YUV” and “Sub Brt YUV”, and from 0 to 63 for “Cb
Offset YUV” and “Cr Offset YUV”.
d) Video Calibration
The composite video signal is calibrated.
The composite video signal is calibrated by “Sub Cont
Video”, “Sub Brt Video”, “Cb Offset Video” and “Cr
Offset Video” that are located in the lower layer below
this sub menu.
Adjustment range is from 0 to 255 for “Sub Cont
Video” and “Sub Brt Video”, and from 0 to 63 for “Cb
Offset Video” and “Cr Offset Video”.
AD Calibration Adjustment
Refer to Section “2-4. AD Calibration Adjustment”.
Service Mode
AD Converter
Cal Mode
: off
RGB Calibration
YUV Calibration
Video Calibration
4. White Balance
Menu structure
White balance of PDP panel is adjusted.
a)
Window
This machine has the built-in window signal for white
balanced adjustment. Select large window for suitable
adjustment.
Off :
Window is not displayed.
Small :
Small window is displayed.
Large :
All white is displayed.
b) Color Temp.
Select the desired color temperature that you want to
adjust located in the lower layer below this submenu.
Select the desired color temperature from “High”,
“Mid”, “Low”, “User 1”, “User 2” and “User 3”.
n
“User 1”, “User 2” and “User 3” can be adjusted from
the user menu, therefore they are not adjusted here.
c)
Red Gain
Red gain of the selected “Color Temp.” is adjusted.
Adjustment range is from 0 to 255.
d) Green Gain
Green gain of the selected “Color Temp.” is adjusted.
Adjustment range is from 0 to 255.
e)
Blue Gain
Blue gain of the selected “Color Temp.” is adjusted.
Adjustment range is from 0 to 255.
White Balance Adjustment
Refer to Section “2-3. White Balance Adjustment ”.
Service Mode
White Balance
Window
:
Off
Color Temp.
:
High
Red Gain
llllllllll
Green Gain
llllllllll
Blue Gain
llllllllll
Summary of Contents for FWD-50PX1 (English: pgs. 52-97)
