– 32 –-
KDS-R60XBR2/R70XBR2
RM-YD009
RM-YD009
3-4. REGISTRATION ADJUSTMENT
1. Set the service mode to DEM.
2. Display the crosshatch of Test Pattern (see below 1)).
3. Observe the crosshatch, in case of finding out the color is out
of order up or down/right or left, adjust its registration of color
(see below 2)).
R, G, B colors can be adjusted separately.
Note: Don't shift the green.
Adjust the red or blue color to green.
Adjusting color shifts up or down/right or left entirely on the
screen.
Adjustable range: Up or down; 1
±
1 line
Right or left; 2
±
2 dots
1) Crosshatch Pattern Displaying Procedure
• Select '5 TEST_PAT' in PANEL service menu.
• Select '2 PAT_ENB' in its sub menu and set the data 0 to 1.
• Select '4 MODE' in its sub menu and set the data 0 to 4.
The crosshatch pattern appears on the screen.
2) Shifting Procedure
[Up or Down]
• Select '1 TG' in PANEL service menu.
• Select '25 VSFT_R' (shifting Red) or '27 VSFT_B' (shifting
Blue) in its sub menu and set the data 0, 1 or 2 to the best.
(Center value: 1)
[Right or Left]
• Select '1 TG' in PANEL service menu.
• Confirm '0 H_SHIFT' data is 0 in its sub menu.
• Select '1 HSIFTR' (shifting Red) or '3 HSIFTB' (shifting
Blue) in its sub menu and set the data 0, 1, 2, 3 or 4 to the best.
(Center value: 2)
3-5. PICTURE DISTORTION CORRECTION
MECHANISM(R70XBR2)
3-5-1. Preparation
<Place of correction mechanism>
The correction mechanism is
in this bottom cover.
V spacer
H spacer
1
Door cover
2
Screw
<How to remove the bottom cover>
Procedure:
The bottom cover comes off when the door cover on a right side of
the set is removed, and one screw in that is removed.