14
Menu System
Menu System
Using the Features menu you can:
a) Select if you want to listen to the sound from the set directly or through an external amplifier.
b) Adjust automatically the size of picture.
c) Select a time period after which the set switches itself into standby mode.
d) Lock the buttons on the set. In this way, the set only works by using the remote control buttons.
e) Select the source to be output from the Scart connector
:
2/
q
2 (SMARTLINK). In this way you can record from this scart
connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.
Using the Features Menu
1
Press the MENU button on the remote control to display the menu
on the screen.
2
Push the joystick to
$
to select the
symbol, then push to
z
to
enter to the Features menu.
3
Push the joystick to
$
or
4
to select the desired menu item, then
push to
z
(see the table below for the effect of each menu item).
4
Push to
$
or
4
to select the desired setting and press the OK button
to store.
5
Press the MENU button to exit and return to the normal TV screen.
Features
Effect / Operation
Speaker
$
Main
(sound from the set)
4
Centre In
(sound from external amplifier)
Auto Format
$
Off:
Size of picture is not automatically adjusted.
(only for aerial
Normal:
Size of picture is automatically adjusted
signal)
according to the broadcaster information.
4
Full:
The set automatically adjusts the picture size
to eliminate any dark areas on the TV picture (as
shown on the section “Changing the Screen
Format)”.
Format Correction
$
Off:
4:3/14:9 is selected.
(only if Auto Format
is set to “Normal”
4
On:
Smart mode is selected automatically for
or “Full”)
4:3/14:9 broadcast.
Sleep Timer
4
Off
10
min.
20
min.
...
$
90
min.
• One minute before the set switches into standby
mode, the time remaining is displayed on the
screen
automatically.
• When watching the TV, press the
button on
the remote control to display the time remaining.
• To return to normal operation from standby
mode, press the TV
button on the remote
control.
Parental lock
$
Off
(Normal mode)
4
On
(The set can only be switched on using the
remote control, the buttons on the TV do not
work)
AV2 Output
$
TV
(audio/video signal from the aerial)
AV1
(audio/video signal from the Scart
connector
:
1/
).
AV2
(audio/video signal from the Scart
connector
:
2/
q
2 (SMARTLINK).
AV3
(audio/video signal from the Scart
connector
:
3/
q
3).
4
AV4
(audio/video signal from the connector
…
4
placed in the front of the set).
If you have connected a decoder, please remember
to change back the AV2 Output to "TV" for correct
unscrambling.
Picture Adjustment
Select:
Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Noise Reduction
Colour Tone
Personal
On
Off
Normal
Features
Auto Format
Format Correction
Sleep Timer
Parental Lock
AV2 Output
Normal
On
Off
Off
TV
Select:
Enter:
Speaker
Main
Speaker
Main
Centre In
10 min
Sleep Timer
Parental Lock
Off
On
AV2 Output
TV
AV1
AV2
AV3
AV4
Auto Format
Off
Normal
Full
Format Correction
Off
On
S
RM 903
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
TV
VIDEO
