Sony GXDL52H1 - 52" LCD Flat Panel Display Manual Download

Page: 57 / 311

Connector

Description

AC IN

socket

Connect the supplied AC power cord to this socket and to a wall outlet. Once you connect
the AC power cord, the

indicator lights up in red and the display goes into the

standby mode. See page 18.

SPEAKER

socket

Connect the speakers SS-SPG02 (not supplied) to this socket. For more details on
connecting the speakers, see the operating manual that came with the speakers. For details
on how to route the speaker cords, see page 19.

REMOTE

(10BASE-T/100BASE-TX)

Serves to connect the display to a network, using a 10BASE-T/100BASE-TX LAN cable.
You can assign various settings and control the display via the network from a PC.

• When you connect the LAN cable of the unit to peripheral device, use the supplied cable to

prevent malfunction due to radiation noise.

• For safety, do not connect the connector for peripheral device wiring that might have

excessive voltage to this port. Follow the instructions for this port.

When using this connector, select “Display” in “Network Port”. (page 31)

AUDIO

(Stereo mini jack)

Outputs an audio of the signal currently indicated on the screen. Outputs an audio signal
corresponding to the active* picture while in the “P&P” or “PinP” mode.

Settings assigned in “Sound Mode” will not be reflected.

VIDEO

S VIDEO IN

(Mini DIN 4-pin): Connects to the S Video output of a piece of video

equipment.

VIDEO IN

(BNC): Connects to the video output of a piece of video equipment.

VIDEO OUT

(BNC): Connects to the video input of a piece of video equipment. Pictures

input from VIDEO IN will be output.

AUDIO IN

(Stereo mini jack): Connects to the audio output of a piece of video

equipment.

HD15 (RGB/

COMPONENT)

(D-sub 15-pin)

HD15 (RGB/COMPONENT) IN:

Connects to the analog RGB signal or component

signal output of a piece of video equipment or PC. See page 43

AUDIO IN:

Inputs an audio signal. Connects to the audio signal output of a piece of

video equipment or PC.

HD15 (RGB/COMPONENT) OUT:

Connects to the analog RGB signal or component

signal input of a piece of video equipment or PC. See page 43

Signals input from the

HD15 (RGB/COMPONENT) IN connector above will be output.

• When inputting a component signal, be sure not to input sync signals to pins 13 and 14.

If you do so, the picture may not be displayed properly.

• When the display is not connected to an AC power or is in the standby mode, no signal

is output from the HD15 (RGB/COMPONENT) OUT.

DVI

(DVI-D 24-pin)

DVI IN:

Connects to the digital signal output terminal of the video equipment or PC.

Supports HDCP copy protection.

AUDIO IN:

Inputs an audio signal. Connects to the audio signal output of a piece of

video equipment, etc.

HDMI IN

HDMI (High-Definition Multimedia Interface) provides an interface between the display
and any HDMI-equipped audio/video equipment, as well as PC. You can enjoy enhanced
or high-definition video, and two-channel digital audio.
The appropriate mode for a piece of audio/video equipment or PC is automatically
selected in accordance with the connected equipment.

Be sure to use only an HDMI cable (not supplied) that bears the HDMI logo. We
recommend that you use a Sony HDMI cable (high speed type).

Caution

Note

Notes

Note