About the instruction manual video
Watch the video to find out how to register a device (pairing) for the first time and about the connection procedure for the
second and subsequent times.
https://rd1.sony.net/help/mdr/mov0011/h_zz/
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Android smartphone.
To delete all Bluetooth pairing information, see “
Initializing the headset to restore factory settings
Note
When pairing a device, [WF-H800 (h.ear)], [LE_WF-H800 (h.ear)], or both may be displayed on the connecting device. When
both or [WF-H800 (h.ear)] is displayed, select [WF-H800 (h.ear)]; when [LE_WF-H800 (h.ear)] is displayed, select [LE_WF-H800
(h.ear)].
If pairing is not established within 5 minutes, pairing mode is canceled. In this case, set the headset into the charging case, and
start the operation again from step 1.
Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
Touch the switch to turn on the Bluetooth function.
2.
Touch [WF-H800 (h.ear)].
If Passkey (*) input is required, input “0000”.
The headset and smartphone are paired and connected with each other.
When you are wearing the headset, you will hear the voice guidance say, “Bluetooth connected” from the left unit.
If they are not connected, see “
Connecting to a paired Android smartphone
If [WF-H800 (h.ear)] does not appear on the Android smartphone screen, try again from the beginning of step 4.
5
A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.
*
29
