1
G
etting star
ted
US
Step 2: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
The lens cover is opened and your camcorder is turned on.
To turn on your camcorder when the LCD screen is open, press POWER.
2
Select the desired geographical area with
/
, then touch [NEXT].
To set the date and time again, touch
(MENU)
[CLOCK/ LANG] (under
[GENERAL SET] category)
[CLOCK SET]. When an item is not on the screen, touch
/
until the item appears.
3
Set [DST SET] or [SUMMERTIME], date and time, then touch .
The clock starts.
If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.
The date and time does not appear during recording, but they are automatically recorded on the
recording media, and can be displayed during playback. To display the date and time, touch
(MENU)
[PLAYBACK SET] (under
[PLAYBACK] category)
[DATA CODE]
[DATE/TIME]
.
You can turn off the operation beeps by touching
(MENU)
[SOUND/DISP SET]
Touch the button on the
LCD screen.
(Movie): To record movies
(Photo): To record photos
POWER button
MODE button
