5
Cust
omizing y
our camc
or
der
US
When the white balance has been set with
[ONE PUSH], if the lighting conditions
changed by bringing your camcorder outdoors
from inside the house, or vice versa, you need
to redo the [ONE PUSH] procedure to readjust
the white balance.
SPOT MTR/FCS (Spot meter/
focus)
You can adjust the brightness and focus
for the selected subject simultaneously.
This function enables you to use [SPOT
METER] (p. 65) and [SPOT FOCUS]
(p. 65) at the same time.
Touch the subject in the frame of which you
want to adjust the brightness and focus.
To adjust the brightness and focus
automatically, touch [AUTO].
Notes
[EXPOSURE] and [FOCUS] are automatically
set to [MANUAL].
SPOT METER (Flexible spot
meter)
You can adjust and fix the exposure
to the subject, so that it is recorded in
suitable brightness even when there is
strong contrast between the subject and
the background, such as subjects in the
spotlight on stage.
Touch the subject in the frame of which you
want to adjust the exposure.
To return the setting to automatic exposure,
touch [AUTO].
Notes
[EXPOSURE] is automatically set to
[MANUAL].
SPOT FOCUS
You can select and adjust the focal point to
aim it at a subject not located at the center
of the screen.
Touch the subject in the frame of which you
want to adjust the focus.
To adjust the focus automatically, touch
[AUTO].
Notes
[FOCUS] is automatically set to [MANUAL].
EXPOSURE
You can fix the brightness of a picture
manually. Adjust the brightness when the
subject is too bright or too dark.
Touch
/
to adjust the brightness.
To adjust the exposure automatically, touch
[AUTO].
