9
Cust
omizing y
our camc
or
der
US
OFF
The camcorder does not turn on and off when
the LCD screen opens and closes.
OTHER SETTINGS
DEMO MODE
When your camcorder is connected to a
wall outlet (wall socket), a demonstration
movie appear about 10 minutes after you
turn on the (Movie) lamp by pressing
MODE.
ON
The demonstration appears.
OFF
The demonstration does not appear.
Notes
A movie you have recorded will be registered as
the demonstration movie if it satisfies all of the
following conditions (HDR-CX150/XR150).
The movie is protected
The movie is the first one displayed on the
VISUAL INDEX screen
The movie is saved on the internal recording
media
The movie is recorded with high definition
image quality (HD)
Tips
When you set this item to [ON] and touch
, the demonstration starts playing.
The demonstration will be suspended:
When you press START/STOP or PHOTO
When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes)
When you turn on the (Photo) lamp
When you press
(VIEW IMAGES)
CALIBRATION
See page 99.
DROP SENSOR (HDR-XR150)
Your camcorder detects that it is dropping,
and protects the internal hard disk.
ON
Activates the drop sensor. When it is detected
that the camcorder is dropping, you may
not be able to record or play back images
correctly, to protect the internal hard disk.
When dropping is detected, appears.
OFF (
)
Deactivates the drop sensor.
Notes
Set the drop sensor to [ON] when you use
the camcorder. Otherwise, if you drop the
camcorder, you may damage the internal hard
disk.
In a non-gravity situation, the drop sensor
activates. When you record images during an
activity such as roller-coasting or skydiving, you
can set [DROP SENSOR] to [OFF] so as not to
activate the drop sensor.
CTRL FOR HDMI (Control for HDMI)
When connecting your camcorder to a
“BRAVIA” Sync compatible TV with the
HDMI cable (sold separately), you can play
back movies on your camcorder by aiming
the TV’s Remote Commander at the TV
(p. 39).
ON
Operates your camcorder using the TV’s
Remote Commander.
OFF
Does not operate your camcorder using the
TV’s Remote Commander.
