GB
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (
), and then adjust the angle
(
).
To turn off the beep sound
Select
[Setup]
[
General Settings]
[
Beep
]
[Off].
Notes
The recording date, time and condition, and coordinates (HDR-CX740VE/CX760VE/PJ710VE/PJ740VE/
PJ760VE) are recorded automatically on the recording media. They are not displayed during recording.
However, you can check them as [Data Code] during playback. To display them, select
[Setup]
[
Playback Settings]
[Data Code]
[Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area
ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending on the
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to
[Off] (HDR-CX740VE/CX760VE/PJ710VE/PJ740VE/PJ760VE).
[Power On By LCD] (HDR-PJ710VE/PJ720E) (p. 71)
To set the date and time again: [Date & Time Setting] (p. 72)
To calibrate the touch panel: [Calibration] (p. 82)
90 degrees to the camcorder
90 degrees (max.)
180 degrees (max.)
Summary of Contents for Handycam HDR-CX730E
Page 95: ...95 GB Others Index ...
