1
GB
G
etting star
ted
4
Connect the AC Adaptor (
),
the power cord (mains lead) (
)
and the USB cable (
) to your
camcorder and the wall outlet
(wall socket).
The CHG (charge) lamp turns on.
The CHG (charge) lamp turns off when the
battery pack is fully charged. Disconnect
the USB cable from the USB jack of your
camcorder.
5
Close the battery/memory card/
jack cover.
Flip the battery/memory card/jack cover
back (
), then slide (
) and close the cover
firmly until the yellow mark of the cover lock
lever is hidden.
Notes
You cannot insert any battery pack other than an NP-BG1 (supplied) or an NP-FG1 (sold separately) into
your camcorder.
You cannot use a Sony CP-AH2R, CP-AL, or AC-UP100 portable power supply device (sold separately)
to charge the camcorder.
In the default setting, the LCD screen turns dark if you do not operate the camcorder for about 1 minute,
and the power turns off if you do not operate the camcorder for 2 minutes, to save battery power ([Power
Save] p. 46).
CHG
(charge)
lamp
To the wall outlet (wall socket)
USB plug
(small)
USB plug
(big)
Summary of Contents for Handycam HDR-GW55VE
Page 63: ......