"Handycam" User Guide
Search
Operation Search
Before use
Getting started
Recording
Playback
Saving images with a PC
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Customizing your camcorder > Setup > USB Power Supply
USB Power Supply
Set whether to use the USB power supplied function when the camcorder is connected to a computer or
a USB device using the USB cable.
1.
[Setup]
[ Connection]
[USB Power Supply].
2.
Select the desired item.
On
Power is supplied when connected using the USB cable.
Off
Disables USB power supplied function even if you connect the camcorder to a device such as a
computer using a USB cable.
Notes
If you changed this setting while the USB cable was connected to the camcorder, disconnect the
USB cable and connect it again.
The setting of [USB Power Supply] is effective only when the camcorder is connected to a USB
device that is compatible with the 500 mA power supply standard.
Only the playback functions are available while the camcorder is connected to a USB device that is
compatible with the 500 mA power supply standard.
Back to top
Copyright 2012 Sony Corporation
149
Summary of Contents for Handycam HDR-GW77
