"Handycam" User Guide
Search
Operation Search
Before use
Getting started
Recording
Playback
Saving images with a PC
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Customizing your camcorder > Setup > Power Save
Power Save
You can change the settings for the backlight of the LCD screen and the power status of the camcorder.
1.
[Setup]
[ General Settings]
[Power Save].
2.
Select the desired item.
Standard
The backlight of the LCD screen turns dark automatically if you do not attempt to operate your
camcorder for more than about 1 minute.
The camcorder turns off automatically if you do not attempt to operate your camcorder for more
than about 2 minutes.
Max
The brightness of the LCD screen is adjusted to the surrounding brightness automatically.
The backlight of the LCD screen turns dark automatically if you do not attempt to operate your
camcorder for more than about 15 seconds.
The camcorder turns off automatically if you do not attempt to operate your camcorder for more
than about 1 minute.
Off
The backlight of the LCD screen is always on brightly. The camcorder does not turn off
automatically.
Back to top
Copyright 2012 Sony Corporation
158
Summary of Contents for Handycam HDR-GW77
