93
Trou
bl
esh
oot
in
g
You cannot delete all images at one time.
• Release the lock on the write-protect tab of the “Memory Stick Duo” if there is one (p. 112).
You cannot format the “Memory Stick Duo.”
• Release the lock on the write-protect tab of the “Memory Stick Duo” if there is one (p. 112).
The data file name is not indicated correctly.
• Only the file name is displayed, unless the directory structure conforms to the universal
standard.
• The file is damaged.
• The file format is not supported by your camcorder (p. 112).
The data file name flashes.
• The file is damaged.
• The file format is not supported by your camcorder (p. 112).
Refer also to “Adjusting the image during recording” (p. 95).
Pressing START/STOP or PHOTO does not record images.
• The playback screen is displayed. Set the POWER switch to
(Movie) or
(Still)
• Your camcorder is recording the scene you have just shot on the hard disk. You cannot make
new recording during this period (p. 34).
• The hard disk of the camcorder is full. Delete unnecessary images (p. 51). Or perform
[
FORMAT] (p. 62).
• Total number of movie scenes or still images exceeds the recordable capacity of your camcorder
(p. 15). Delete unnecessary images (p. 51).
• While activating [DROP SENSOR] (p. 76), you may not record movies/still images.
You cannot record a still image.
• The playback screen is displayed. Set your camcorder to recording standby (p. 34).
• You can capture up to 3 still images only during movie recording.
• Release the lock on the write-protect tab of the “Memory Stick Duo” if there is one (p. 112).
• The “Memory Stick Duo” has run out of space. Use a new “Memory Stick Duo” or format the
“Memory Stick Duo” (p. 62). Or delete the unnecessary images (p. 52).
• You cannot record a still image together with:
– [SMTH SLW REC]
– [FADER]
– [D.EFFECT]
– [PICT.EFFECT]
Recording
Continued
,
