68
MOVIE SETTINGS (Continued)
Select [ON] so that the image on the screen
is magnified by about 2 times when
adjusting focus manually (p. 78). The
screen returns to the original size
automatically when the focusing is finished.
Touch [OFF] to release this function.
b
Notes
• You cannot activate this function during
recording.
• The function is released if you use the zoom
function.
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
z
Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting,
is displayed. The zebra pattern
is not recorded.
B
OFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
b
Notes
• Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z
Tips
• IRE represents the screen brightness.
B
AUTO
Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.
– When your camcorder recognizes the
remaining hard disk capacity with the
POWER switch set to
(Movie).
– When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch set to
(Movie).
– When you select the movie recording
mode on the HOME MENU.
ON
Always displays the remaining hard disk
indicator.
b
Notes
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
S
You can assign an item you want to set to
the camera control ring and adjust it
manually using the camera control ring.
B
FOCUS
Assigns [FOCUS] (p. 78) to the camera
control ring.
EXPOSURE
Assigns [EXPOSURE] (p. 79) to the
camera control ring.
AE SHIFT
Assigns [AE SHIFT] (p. 66) to the camera
control ring.
EXP.FOCUS (Expanded
focus)
GUIDEFRAME
ZEBRA
REMAINING
RING SETTING
