115
Trou
bl
esh
oot
in
g
“
” is indicated on an image in the VISUAL INDEX screen.
• Loading of the data may have failed. It may be indicated correctly when you turn off the
power and then turn it on again, or repeat removing and inserting the “Memory Stick Duo” a
couple of times.
• This may appear on still images recorded on other devices, edited on a computer, etc.
No sound or only a quiet sound is heard when playing back a disc.
• Turn up the volume (p. 49).
• Sound is not output when the LCD screen is closed. Open the LCD screen.
• When you record sound with [MICREF LEVEL] (p. 98) set to [LOW], the recorded sound
may be difficult to hear.
• You cannot record sounds during [SMTH SLW REC].
You cannot view the image or hear the sound on the TV connected with the
component video cable.
• Set [COMPONENT] according to the requirements of the connected device (p. 90).
• When you are using the component video cable, make sure the red and white plugs of the A/
V connecting cable are connected (p. 53).
You cannot view the image or hear the sound on the TV connected with the
HDMI cable.
• Images are not output from the HDMI OUT jack, if copyright protection signals are recorded
in the images.
You cannot hear the sound.
• When you are using the component video cable, make sure the red and white plugs of the A/
V connecting cable are connected (p. 53, 56).
• When you are using the S VIDEO plug, make sure the red and white plugs of the A/V
connecting cable are connected (p. 56).
The aspect ratio of the playback is not correct when connecting your
camcorder to the TV.
• Set [TV TYPE] depending on your TV (p. 90).
The image appears distorted on the 4:3 TV.
• This happens when viewing a image recorded in the 16:9 (wide) mode on a 4:3 TV. Set [TV
TYPE] correctly (p. 90) and play back the image.
Viewing on the TV
Continued
,
