53
Advanced operations
Editing onto another tape
Starting editing
Turn down the volume of the camcorder while editing. Otherwise, picture distortion
may occur.
(
1
)
Insert a blank tape (or a tape you want to record over) into the VCR, and insert
your recorded tape into the camcorder.
(
2
)
Play back the recorded tape on the camcorder until you locate the point where
you want to start editing, then press
P
to set the camcorder in playback pause
mode.
(
3
)
On the VCR, locate the recording start point and set the VCR in recording
pause mode.
(
4
)
Press
P
on the camcorder and VCR simultaneously to start editing.
To edit more scenes
Repeat steps 2 to 4.
To stop editing
Press
π
on both the camcorder and the VCR.
Note on Fine Synchro Edit
If you connect a video deck that has the Fine Synchro Edit feature to the LANC
l
jack
of the camcorder, using a LANC cable (not supplied), the edit will be even more
precise.
