HAP-Z1ES
80
Pin No.
Pin Name
I/O
Description
N11
VDDARM23_CAP6
O
Internal regulator output terminal Not used
N12
VDD_CACHE_CAP
O
Internal regulator output terminal (+1.1V)
N13
VDDARM_CAP6
O
Internal regulator output terminal
N14
VDDARM_IN6
-
Power supply terminal for the cores regulator (+1.42V)
N15
GND67
-
Ground terminal
N16
VDDSOC_IN6
-
Power supply terminal for the SOC and PU regulators (+1.42V)
N17
VDDPU_CAP6
O
Internal regulator output terminal
N18
GND68
-
Ground terminal
N19
DI0_DISP_CLK
O
Clock signal output to the liquid crystal display
N20
DI0_PIN3
-
Not used
N21
DI0_PIN15
O
Data enable signal output to the liquid crystal display
N22
EIM_BCLK
-
Not used
N23
EIM_DA14
I
Boot mode setting terminal Fixed at “L”
N24
EIM_DA15
I
Boot mode setting terminal Fixed at “H”
N25
DI0_PIN2
-
Not used
P1
CSI0_PIXCLK
I
CONF_DONE signal input from the FPGA
P2
CSI0_DAT5
-
Not used
P3
CSI0_DATA_EN
-
Not used
P4
CSI0_MCLK
O
Reset signal output to the FPGA “L”: reset
P5, P6
GPIO_19, GPIO_18
-
Not used
P7
NVCC_GPIO
-
Power supply terminal for the GPIO interface (+3.3V)
P8
GND74
-
Ground terminal
P9
VDDARM23_IN5
-
Power supply terminal for the cores regulator Not used
P10
GND70
-
Ground terminal
P11
VDDARM23_CAP7
O
Internal regulator output terminal Not used
P12
GND71
-
Ground terminal
P13
VDDARM_CAP7
O
Internal regulator output terminal
P14
VDDARM_IN7
-
Power supply terminal for the cores regulator (+1.42V)
P15
GND72
-
Ground terminal
P16
VDDSOC_IN7
-
Power supply terminal for the SOC and PU regulators (+1.42V)
P17
VDDPU_CAP7
O
Internal regulator output terminal
P18
GND73
-
Ground terminal
P19
NVCC_LCD
-
Power supply terminal for the LCD interface (+3.3V)
P20 to
P24
DISP0_DAT4,
DISP0_DAT3,
DISP0_DAT1,
DISP0_DAT2,
DISP0_DAT0
O
RGB signal (blue) output to the liquid crystal display
P25
DI0_PIN4
O
Liquid crystal display backlight on/off control signal output terminal “H”: backlight on
R1
GPIO_17
O
Reset signal output to the PCIe transceiver “L”: reset
R2 to R7
GPIO_16, GPIO_7,
GPIO_5, GPIO_8,
GPIO_4, GPIO_3
-
Not used
R8
GND78
-
Ground terminal
R9
VDDARM23_IN6
-
Power supply terminal for the cores regulator Not used
R10
VSSSOC_CAP1
O
Internal regulator output terminal (+1.1V)
R11
VDDARM23_CAP8
O
Internal regulator output terminal Not used
R12
GND75
-
Ground terminal
R13
VDDARM_CAP8
O
Internal regulator output terminal
R14
VDDARM_IN8
-
Power supply terminal for the cores regulator (+1.42V)
R15
GND76
-
Ground terminal
R16
VDDSOC_IN8
-
Power supply terminal for the SOC and PU regulators (+1.42V)
R17
GND77
-
Ground terminal
R18
NVCC_DRAM1
-
Power supply terminal for the DDR interface (+1.5V)
R19
NVCC_ENET
-
Power supply terminal for the ENET interface (+3.3V)
R20 to
R22
DISP0_DAT13,
DISP0_DAT10,
DISP0_DAT8
O
RGB signal (green) output to the liquid crystal display
R23 to
R25
DISP0_DAT6,
DISP0_DAT7,
DISP0_DAT5
O
RGB signal (blue) output to the liquid crystal display
Summary of Contents for HAP-Z1ES
Page 119: ...MEMO HAP Z1ES 119 ...