HBD-E780W/E980W/E985W
28
System Information
Sequence Number :
MAC :
Model :
Destination :
IP :
IF-con Block0 Version :
Block1 Version :
Bootloader Version :
Host Main Version :
Host Sub Version :
Middleware Version :
ADSP Version :
2nd DSP Version :
IF_MODEL :
IF_DEST :
HELP: [RET] [RIGHT]
(Screen 1)
System Information
DVD DIOP :
BD DIOP :
Drive Firm Revision :
CD DIOP :
WLAN module MAC Address :
WLAN module Serial :
WLAN module hw Version :
CD LD TIME :
DVD LD TIME :
BD LD TIME :
HELP: [RET] [LEFT]
(Screen 2)
16. Drive
This menu is used to operate the drive using drive-related diagnos-
tic and tools.
Screen 1: Selecting items under
*
Drive
Operation:
[
<
]/[
,
] Selects the category
[
m
]/[ ]
Activate the selected category
[RETURN] Returns to the top menu of the service mode
[1] Drive OP data Write
[2] Servo Parameter Check Menu (Not used)
[3] Servo Signal Check Menu (Not used)
[4] S-Curve Check Menu (Not used)
[5] Readability Check Menu (Not used)
[6] OP Position Check Menu (Not used)
[7] OP Check Menu (Not used)
[8] Load Eject Aging (Not used)
[9] Spindle Control Check Menu (Not used)
[10] FA Test Mode (Not used)
Screen 2: To start OP data Write
Operation:
[ ] Starts
Screen 3: Show OP data Write result
Operation:
NG - USB is not
f
nd
NG - File (Butada.txt) is not
f
nd
OK - OP data write
• Drive
Test
For drive operating check. Service is only use Drive OP data write
to rewrite OP data after change of new CPU.
Drive
[1] Drive OP data Write
Drive OP data Write
Insert USB StorageDevice ...
Remove DISC and Close tray.
HELP: [ENT] [RET]
[ENT] Start
(Screen 1)
(Screen 2)
(Screen 3)
HELP: [ENT] [RET]
Drive OP data Write
Insert USB StorageDevice ...
Remove DISC and Close tray.
NG - USB is not find
NG - File(Butada.txt) is not find
OK - OP data write
[ENT] Start
