23
HCD-HDX500/HDX501W
Note:
Incorrect operations may be performed if the test mode is not entered
properly. In this case, press the
?
/
1
button to turn the power off,
and retry to enter the test mode.
COLD RESET
The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning the
set to the customers.
Procedure:
1. Press the
?
/
1
button to turn the power on.
2. Press three buttons
x
,
A
and
?
/
1
simultaneously.
3. When this button is operated, display as “COLD RESET” for
a while and all of the settings are reset.
PANEL TEST MODE
This mode is used to check the software version, FL, LED and KEY.
2-1. Display Test Mode
Procedure 1:
1. Press the
?
/
1
button to turn the power on.
2. Press three buttons
X
,
.
and
A
simultaneously.
3. When the display test mode is activated, all segments are turned
on.
4. To exit from this mode, press three buttons
X
,
.
and
A
simultaneously.
2-2. Version Test Mode
Procedure 1:
1. When the display test mode is activated, press the
.
button
and “DC5” (HDX500)/“DC5W” (HDX501W) is displayed,
the version test mode is activated.
2. Whenever the
.
button is pressed, the display changes in
order of “DC5” (model name)
→
“NA” (destination)
→
MC
→
SYS
→
UI
→
DVD
→
CDMA
→
CDMB
→
ST
→
TA
→
DSP
→
TM
→
XM
→
CLA
→
CEC
→
“DC5” (model name).
Note:
Model name/destination is different according to model.
3. Press the
>
button and the date of the software production is
displayed.
4. Press the
>
button again and the version is displayed.
5. To exit from this mode, press three buttons
X
,
.
and
A
simultaneously.
2-3. Key Test Mode
Procedure 1:
1. When the display test mode is activated, press the
H
button,
to select the key test mode.
2. To enter the KEY test mode, the fluorescent indicator displays
“K0 V0”. Each time an another button is pressed, “KEY” value
increases. However, once a button is pressed, it is no longer
taken into account. When all keys are pressed correctly, “K13
V0” is displayed.
dial is turned in the direction of (+), “V0”
is changed to “V1”, then ... “V9”.
When the
dial is turned in the direction of (–), “V0”
is changed to “V9”, then ... “V1”.
4. To exit from this mode, press three buttons
X
,
.
and
A
DISC TRAY LOCK
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure :
1. Press the
I
/
1
button to turn the set on.
2. Press the
[FUNCTION]
button to set DVD function.
3. Insert a disc.
4. Press the
x
button and the
A
button simultaneously for five
seconds.
5. The message “LOCKED” is displayed and the tray is locked.
SECTION 4
TEST MODE
Releasing Procedure :
1. Press the
x
button and the
A
button simultaneously for five
seconds again.
2. The message “UNLOCKED” is displayed and the tray is
unlocked.
Note:
When “LOCKED” is displayed, the tray lock is not released by turning
power on/off with the
?
/
1
button.
DVD SHIP MODE
Use this mode when returning the set to the customer after repair.
Procedure:
1. Press the
?
/
1
button to turn the set on.
2. Press the
[FUNCTION]
button to set the function “DVD”.
3. Remove all discs, and then press two buttons
H
and
?
/
1
simultaneously.
4. After a message “MECHA LOCK” is displayed on the
fluorescent indicator tube, pull out the AC plug.
5. To exit from this mode, press the
?
/
1
button to turn the set
on.
AM STEP CHANGE
A step of AM channels can be changed over between 9 kHz and 10
kHz.
Procedure:
1. Press the
?
/
1
button to turn the set ON.
2. Press the
[FUNCTION]
button to set the function “TUNER
AM”.
3. Press the
?
/
1
button to turn the set OFF.
4. Press two buttons
>
and
?
/
1
simultaneously, and the display
of fluorescent indicator tube changes to “AM 9k STEP” or
“AM 10k STEP”, and thus the channel step is changed over.
PRODUCT OUT
This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the RAM
to initial conditions. Use this mode when returning the set to the
customer after repair.
Procedure:
1. Press the
?
/
1
button to turn the power on.
2. Press the
[FUNCTION]
button to set the function “DVD”.
3. Remove all discs, and then press three buttons
>
,
A
and
?
/
1
simultaneously.
4. After the “STANDBY” blinking display finishes, the message
“MECHA LOCK” is displayed on the fluorescent indicator
tube disconnect the AC power plug, then the ship mode is set.
AUTOMATIC ACOUSTIC FIELD CALIBRATION
MICROPHONE TEST MODE
Procedure:
1. Press the
?
/
1
button to turn the power on.
2. Insert ECM-AC2 supplied as an accessory into the AUDIO
IN/A.CAL MIC jack.
3. While pressing the
X
and
A
buttons simultaneously, turn the
[VOLUME]
dial in the direction of (+).
4. The state of jack is displayed in the fluorescent indicator tube.
NON : Not detected
ST : STEREO
MONO : MONO
DEMO PLAY OUT
It is a mode to release the demonstration reproduct by the dedicated
demonstration disc.
Procedure:
1. During playback the DEMO disc, press the
x
and
H
buttons
for five seconds simultaneously.
2. The message “DEMO OFF” is displayed, a mode to reproduct
the demonstration is released.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
