SERVICE MANUAL
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
DVD RECEIVER
9-890-663-04
2015G80-1
©
2015.07
AEP Model
UK Model
Australian Model
HCD-SHAKEX1/SHAKEX3
E Model
HCD-SHAKEX1/SHAKEX3/SHAKEX7
Ver. 1.3 2015.07
• HCD-SHAKEX1 is the tuner, USB, DVD Player, Bluetooth, NFC and ampli
fi
er section in SHAKE-X1D.
• HCD-SHAKEX3 is the tuner, USB, DVD Player, Bluetooth, NFC and ampli
fi
er section in SHAKE-X3D.
• HCD-SHAKEX7 is the tuner, USB, DVD Player, Bluetooth, NFC and ampli
fi
er section in SHAKE-X7D.
SPECIFICATIONS
DVD Section
Model Name Using Similar Mechanism HCD-GPX555/GPX888
DVD Mechanism Type
CDM90-DVBU204//M
Optical Pick-up Name
CMS-S76RFG1 OR CMS-S76RFGP
Photo: HCD-SHAKEX7
5.07
Ampli
fi
er section
The following are measured at
AC 120 V – 240 V, 50/60 Hz
SHAKE-X7D
Power Output (rated):
800 W + 800 W (at 8 ohms, 100 Hz,
1%
THD)
RMS output power (reference):
1,200 W + 1,200 W (per channel at
8 ohms, 100 Hz)
SHAKE-X3D
Power Output (rated):
400 W + 400 W (at 4 ohms, 100 Hz,
1%
THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 100 Hz)
SHAKE-X1D
Power Output (rated):
400 W + 400 W (at 4 ohms, 100 Hz,
1%
THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 100 Hz)
Inputs
AUDIO IN 1/PARTY CHAIN IN L/R
Voltage 2 V, impedance 47 kilohms
AUDIO IN 2 L/R
Voltage 2 V, impedance 47 kilohms
MIC 1, MIC 2
Sensitivity 1 mV, impedance
10
kilohms
(USB) 1, (USB) 2 port: Type A
Outputs
AUDIO OUT/PARTY CHAIN OUT L/R
Voltage 2 V, impedance 1 kilohm
VIDEO OUT
Max. output level 1 Vp-p,
unbalanced, Sync. negative load
impedance 75 ohms
USB section
Supported bit rate
WMA: 48 kbps – 192 kbps, VBR, CBR
AAC: 48 kbps – 320 kbps, VBR, CBR
Sampling frequencies
WMA: 44.1 kHz
AAC: 44.1 kHz
Supported USB device
Mass Storage Class
Maximum current
1
A
Disc/USB section
Supported bit rate
MPEG1
Layer-3:
32 kbps – 320 kbps, VBR
Sampling frequencies
MPEG1
Layer-3:
32 kHz/44.1 kHz/48 kHz
Xvid
Video codec: Xvid
Bit rate: 4.854 Mbps (MAX)
Resolution/Frame
rate:
720 × 480, 30 fps
720 × 576, 25 fps
Audio codec: MP3
MPEG4
File format: MP4 File Format
Video
codec:
MPEG4 Simple Profile
(AVC is not compatible.)
Bit rate: 4 Mbps
Resolution/Frame
rate:
720 × 576, 30 fps
Audio
codec:
AAC-LC
(HE-AAC is not compatible.)
DRM: Not compatible
Disc player section
System
Compact disc and digital audio and
video system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 µW
* This output is the value
measurement at a distance of
200 mm from the objective lens
surface on the Optical Pick-up
Block with 7 mm aperture.
Frequency response
20 Hz – 20 kHz
Video color system format
NTSC and PAL
Tuner section
FM stereo, FM/AM superheterodyne tuner
Antenna
FM lead antenna
AM loop antenna
FM tuner section
Tuning range
87.5 MHz – 108.0 MHz (50 kHz step)
AM tuner section
Tuning range
European and Russian models only:
531 kHz – 1,602 kHz (9 kHz step)
Latin American and Australian
models only:
531 kHz – 1,710 kHz (9 kHz step)
530 kHz – 1,710 kHz (10 kHz step)
Other
models:
531 kHz – 1,602 kHz (9 kHz step)
530 kHz – 1,610 kHz (10 kHz step)
BLUETOOTH section
Communication system
BLUETOOTH Standard version 3.0
Output
BLUETOOTH Standard Power Class 2
Maximum communication range
Line of sight approx. 10 m
1)
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835
GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP (Advanced Audio Distribu-
tion Profile)
AVRCP (Audio Video Remote
Control Profile)
SPP (Serial Port Profile)
Supported codecs
SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
1)
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
software application, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH communica-
tion between devices.
General
Power requirements
AC 120 V – 240 V, 50/60 Hz
Power consumption
SHAKE-X7D:
375
W
SHAKE-X1D/X3D:
220
W
Power consumption (at the Power Saving
mode)
0.5 W (When “BT STBY” is set to
“OFF”)
4 W (When “BT STBY” is set to “ON”)
Dimensions (w/h/d) (excl. speakers)
(Approx.)
455 mm × 165 mm × 330 mm
Mass (excl. speakers) (Approx.)
SHAKE-X7D: 6.3 kg
SHAKE-X1D/X3D: 5.9 kg
Supplied accessories
• Remote control (1)
• R03 (size AAA) batteries (2)
• FM lead/AM loop antenna (1)
SHAKE-X7D only
• Unit: HCD-SHAKEX7 (1)
• Speaker system: SS-SHAKEX7 (2)
• AC power cord (mains lead)
– Latin American, Middle East, and African
models only (2)*
– Other models (1)
* The quantity of the AC power cord
(mains lead) supplied depends on the
area.
– Continued on next page –
HCD-SHAKEX1/SHAKEX3/
SHAKEX7
