52
HCD-XG60/XG500
Pin No.
Pin Name
I/O
Description
78
TC-MUTE
O
Line muting on/off selection signal output to the HA12215F (IC301)
“L”: muting off, “H”: muting on
79
R/PB/PAS
O
Recording/playback/pass selection signal output to the HA12215F (IC301)
“L”: recording mode, “H”: pass, “Hi-z”: playback mode
80
NR-ON/OFF
O
Dolby NR on/off selection signal output to the HA12215F (IC301)
“L”: dolby off, “H”: dolby on
81
REC-MUTE
O
Recording muting on/off selection signal output to the HA12215F (IC301)
“L”: muting on, “H”: muting off
82
BIAS
O
Recording bias on/off selection signal output to the HA12215F (IC301)
“L”: bias off, “H”: bias on
83
EQ-H/N
O
Normal/high speed selection signal output to the HA12215F (IC301)
“L”: normal speed, “H”: high speed
84
PB-A/B
O
Deck-A/B selection signal output to the HA12215F (IC301) “L”: deck-A, “H”: deck-B
85
ALC
O
Automatic limiter control signal output to the HA12215F (IC301) “L”: limiter on
86
B-PLAY-SW
I
Detection signal input from the deck- B play detect switch (S1002) “H”: deck-B play
87
A-PLAY-SW
I
Detection signal input from the deck- A play detect switch (S1001) “H”: deck-A play
88
A-HALF
I
Detection signal input from the deck-A cassette detect switch (S1003)
“L”: no cassette, “H”: cassette in
89
B-HALF
I
Detection signal input from the deck-B half detect switch (S1006)
90
B-SHUT
I
Shut off detection signal input from the deck-B side reel pulse detector (IC1002)
91
A-SHUT
I
Shut off detection signal input from the deck-A side reel pulse detector (IC1001)
92
SOFT-TEST
O
Output terminal for the software test (open)
93
HP MUTE
O
Headphone muting control signal output “L”: muting on, “H”: muting off
94
KEY/CD-ADJ
I
Setting terminal for the CD adjustment mode Not used (fixed at “L”)
95
MODEL-IN
I
Model setting terminal
96
AVSS
—
Ground terminal (for A/D conversion)
97
SPEC-IN
I
Destination setting terminal
98
VREF
I
Reference voltage (+5V) input terminal
99
AVCC
—
Power supply terminal (+5V) (for A/D conversion)
100
TC-RELAY
O
Recording/playback selection signal output to the REC/PB switch (IC602)
“L”: playback, “H”: recording
